Problem with gear assist

[lipmar1789]

I have a problem displaying the current gear. After the last update (b33), when the cruise control turns on, N appears instead of the current gear. When the cruise control turns off, everything returns to normal. Patient is Audi A4 B6 (Manual). After update everything was fine

[autopilot]

Yes. I am aware of the bug while the cruise is active. Will be fixed.

[boubou]

Fixed on b33 or b34 ?

Thanks.

[autopilot]

If the problem is found in b33, in which version will it be fixed ?

[pety]

hi. in gear assisst is one bug. while i drive on tempomat the gear assisst is showing "N".

[autopilot]

Read above:

Yes. I am aware of the bug while the cruise is active. Will be fixed.

[pety]

sorry. my mistake

[pety]

any news about tempomat?

[autopilot]

Wait next firmware update.

[pety]

ok.and what is the expected date of release of the update

[denis94]

hello there is new firmware every 6 month . i think next update is for 06/2021.
be patient.

[pety]

OK.

and what about the other two units on the "OK" side?

and what about the date and time for the oil change can as the original - setting the customer by days ... if possible, send the time from the cluster to the radio, it must somehow be sent to the oil change settings.

and as I said before, send the climate and steering wheel from the hidden currency to the diagnostic menu. if the diagnostics is already there, let the climate and the steering wheel be diagnosed as well ..

[autopilot]

what about the other two units on the "OK" side?

No.

what about the date and time for the oil change

No.

send the climate and steering wheel from the hidden currency to the diagnostic menu

No.

[pety]

why? it will be great...
come on autopilot. just a little think about it.

[pety]

Hi. Me again
I found something in my a4 b6. My actual speed is 4km/h more then i set on tempomat. Is there something in new firmware or something in my car...
Thx

[autopilot]

ColorMFA does not control the cruise control. It does not control the speed or other parameters of the cruise control.
ColorMFA displays the current speed (it does not control the current speed either). ColorMFA displays the set speed of the cruise control (it only displays it on the screen).
If there are any discrepancies, then in the calibration section there is a separate calibration of the current speed and calibration of the cruise control speed (it only affects the display on the screen. I repeat that ColorMFA does not control the speed).

[pety]

ok. I thought. That's exactly the calibration I was aiming for. I'll check it out. thanks

New update. I set ccs at the same speed like tacho and everything is ok.
maybe it could be in one item together like speed calibration and there both together or just one to set both at once...

[autopilot]

Specially made separately. The speed source for ColorMFA can be different (dashboard or ESP). The speed source for cruise control is determined only by the engine firmware (it cannot be changed). The engine also has its own processing of speed values. The actual speed and the set speed of the cruise control may differ initially on some cars. You do not see the discrepancies until you install ColorMFA. Cruise control data is not displayed on the original screen.

P.S.: If you have correctly selected the speed source in the ColorMFA settings, then on the A4 8E the discrepancy between the real speed and the cruise control is usually no more than 1-2 km/h. Without calibrations.

[pety]

I understand. thank you for the explanation