Generator Warning

Disi77 · Post 09 Apr 2019, 11:18

i build the CMFA in a Polo 9N. I have only 1 Problem. The Dislay say "Generator Warning" but in teh Pinout there is no Signal from Gnerator..... any Solutions?

DRIVE2 · Post 09 Apr 2019, 12:28

If in cluster pinout does not present Alternator warning signal, connect this wire from ColorMFA to +12V.

For Polo:
TrInput3 from ColorMFA connect to +12 (Ignition kl15 or kl30)

In cars where wire from Alternator to Cluster is not present, info about this warning present in CAN-bus. ColorMFA got it from CAN. Of course if this warning present in original system.

Disi77 · Post 09 Apr 2019, 17:06

ok thx. Original is a Full-Fis install. I wiered the same as MK4 for the Polo 9n1. But k-lin ist not present on the cluster....

DRIVE2 · Post 09 Apr 2019, 18:11

Yes. Need add wire from ColorMFA to nearest K-Line wire.