REQUEST FOR NEW FEATURES / Предложения по новым функциям

Adko13 · Post 17 Apr 2023, 08:29

autopilot wrote: ↑
17 Apr 2023, 05:38
Connection of external sensors is not provided.

what else is needed to connect an external sensor?

DRIVE2 · Post 17 Apr 2023, 08:49

Main ColorMFA hardware is not supported connection of external sensors.

mmgherasim · Post 03 May 2023, 11:32

You think you can reduce the number of beeps for "Next inspection" warning? Currently it beeps 9 times and seems too long. Maybe just 3 beeps like other warnings? Thanks!

DRIVE2 · Post 03 May 2023, 22:03

Currently, there are 3 beeps for each service reminder.
If several service reminders are triggered at the same time, more sounds can be output. Maximum possible 3 sound warnings with 3 beeps each.

mmgherasim · Post 04 May 2023, 08:50

Oh, so if I have warning for oil and filters, it beeps 6 times. I now have oil, filters and something else that has the same interval as oil and it beeps 9 times. Less than 6 times it won't beep at a inspection warning because I always set oil and filters to be the same interval. Maybe you can set the beep to one time for each reminder instead of three?

DRIVE2 · Post 04 May 2023, 10:52

I'll think about how to fix it.

pety · Post 28 May 2023, 21:51

Hi. is there some news in colormfa?thx

usr81 · Post 29 May 2023, 23:36

Здравствуйте. Есть ли возможность добавить на один из выходов, активацию на 3 секунды сразу после выключения зажигания? Очень нужно, для активации дроссельной заслонки в момент глушения дизеля с заглушенным EGR.

goldns · Post 30 May 2023, 11:24

usr81 wrote: ↑
29 May 2023, 23:36
Здравствуйте. Есть ли возможность добавить на один из выходов, активацию на 3 секунды сразу после выключения зажигания? Очень нужно, для активации дроссельной заслонки в момент глушения дизеля с заглушенным EGR.

а в чем проблема использовать замок зажигания + реле с задержкой + одно 5 контактное реле?

https://www.youtube.com/watch?v=TymmEm7OrNc
банально.

pety · Post 05 Jun 2023, 23:34

Hi. It is possible to do something like a big speed number flashing red after driving more than the set speed, not like now, changing to a traffic sign. maybe a red circle with a white surface could still be displayed as a traffic sign behind the flashing speed number, but only as some kind of shadow, but without changing the background, etc., only a circle would appear around the flashing number..thx

DRIVE2 · Post 06 Jun 2023, 23:42

It seems to me that flashing red would look like a error message. It can be distracting while driving.

pety · Post 07 Jun 2023, 00:30

Ok. So no blinking just change to red number.and a red and white circle in shadow mode around the speed like traffic sign.
I must do a picture what i mean...

boubou · Post 23 Jul 2023, 12:11

Hi autopilot, would it be possible to make a grouping in the MFA, MFA1 and then continuing to parade MFA2 as in the old Audi type 8N. When everything is activated in MFA the information is not grouped in a "logical" way in my opinion. Do you want an explanation in text ?
Thanks

DRIVE2 · Post 23 Jul 2023, 12:28

Do you want an explanation in text ?

Yes, if it's possible. I don't understand what you mean.

boubou · Post 23 Aug 2023, 21:04

Hello autopilot

So to keep things simple, you just group all the MFA1s together and once you've done the full turn, you switch over to all the MF2s. That's how it works on the first FIS AUDI type 8L/8N/4B etc.

At present, the values are :

distance 1 then UP distance 2 then UP time 1 then up Time 2....

I therefore propose to do :
distance 1 then UP time 1 then UP....distance 2 then UP time 2....

Is that clear enough?

Thanks

pety · Post 01 Sep 2023, 23:25

Hi.
it is possible to do in next firmware that in main area is not jumping up and down numbers after set tempomat on/off...
or why is it like this now? there is a lot of space between this things...

DRIVE2 · Post 02 Sep 2023, 04:17

Automatic alignment for the best possible screen appearance. Better information perception and minimization of empty areas.

pety · Post 02 Sep 2023, 16:01

and it is possible to skip this thing or have the option to choose it in the settings...

DRIVE2 · Post 02 Sep 2023, 17:17

Not possible... Sorry.

boubou · Post 03 Sep 2023, 00:59

boubou wrote: ↑
23 Aug 2023, 21:04
Hello autopilot

So to keep things simple, you just group all the MFA1s together and once you've done the full turn, you switch over to all the MF2s. That's how it works on the first FIS AUDI type 8L/8N/4B etc.

At present, the values are :

distance 1 then UP distance 2 then UP time 1 then up Time 2....

I therefore propose to do :
distance 1 then UP time 1 then UP....distance 2 then UP time 2....

Is that clear enough?

Thanks

hi,

And for this ?