ColorMFA

Дополнительно
Для некоторых автомобилей с троссиковым приводом ДЗ (дроссельная заслонка) будут недоступны некоторые функции:
- отображение температуры на впуске
- отображение положения ДЗ
- недоступна функция замера мощности

В дополнение к инструкции:
- для отображения наддува необходимо прокинуть/подключить один провод от приборной панели до моторного мозга.
- также дополнительно на Golf,Bora/Jetta,Passat,Skoda можно подключить задний ход и блок контроля ламп (при его наличии).

Подключение наддува

Hi. If I add an oil pressure sensor, can it be integrated into the colormfa? Thanks

Connecting external sensors is not possible.

Hi,

Is it possible to read the Turbo Pressuregroup by can-Bus in T5?

Hi.
In diagnostic mode you may read all possible groups in all available ECU.
But in normal mode ColorMFA don't use diagnostics to read info.
And on all logs which I see, turbo boost not present on CAN-bus in T5.
If your engine ECU send boost to CAN (not in diagnostics), send me log's and I'm add this to firmware.

Ok i See. What about Mirror Down by Reverse Gear this should we Wirkung with T5.

Maybe you solve the Problem with the Navigation, oder you disable the small Status icons if it is ok.

Mirror control for T5 may be added in next firmware.
But you need remember, this function is not ideally working. In mirrors not included position sensor and up/down moving controlled by time. On some cars it not return to previous position (little down or little up) and need manually correcting.

I'm not have any VW Navi device, and all navigation for this cars is not worked in Russia. No have maps.
Need some logs from cars with worked navi (comfort or infotainment CAN-bus) to correct currently errors in show VW-navi in ColorMFA.

Ok, i try to Sent you Dome Logs the next few days

hi, whats the different from Immo2 and immo3? I Need a dash withe xxx920xxx not xxx919xxx right?

xxx920xxx and xxx919xxx does not told about immo2 or immo3.
xxx920xxx - dashboard with CAN
xxx919xxx - dashboard without CAN
ColorMFA working only in CAN dashboards.

Парни привет.Я хочу на т5 такую. Как заказать? и как это чудо поставить?

Покупка
https://colormfa.ru/docs
Где установить? Кто может помочь? / Can help to install ColorMfa

i search the Pinout for Polo 9n (IV)

Not present. There were only a few installations. Guys who installed do not make photo and not tell other info.
Install as on other VW/Skoda, with correcting connection points for Polo dashboard pinout.

Ok i test and give feedback....

any one have a manual for the t4 ?

Not present in "download" version.
You may see this: https://www.drive2.ru/l/468314713814467348/

autopilot писал(а): ↑

14 ноя 2018, 20:27

Not present. There were only a few installations. Guys who installed do not make photo and not tell other info.
Install as on other VW/Skoda, with correcting connection points for Polo dashboard pinout.

I will make soon and polo 9N, will give info then.

autopilot писал(а): ↑

14 ноя 2018, 20:27

Not present. There were only a few installations. Guys who installed do not make photo and not tell other info.
Install as on other VW/Skoda, with correcting connection points for Polo dashboard pinout.

Polo 9N instalation

Position of screen is same like mk4, thats why i not take any pictures.

https://drive.google.com/file/d/13VeONG ... sp=sharing

What is the frimware difference between immo3 regular screen and immo3 large screen clusters? Extra chips/functions?