Oil Pressure on mk4 cars

aditzuthebest · Post 08 Oct 2019, 19:44

Hi,
For this error Low Oil Pressure, is colorMFA capable to display this error?
Look for example for this video: https://www.youtube.com/watch?v=uoBR_5EKqqk
Why I am asking this.. I saw in the instructions this procedure: we connect Low Level Oil (yellow led) to ColorMFA but red led for Low Oil Pressure is not connected.
Thank you!

DRIVE2 · Post 09 Oct 2019, 21:14

No need to make additional connection for Oil Pressure. All data present on CAN-bus.

aditzuthebest · Post 11 Oct 2019, 10:22

Thank you for this info!
Also another question.
I have an AZD engine with manual transmition. Code transmition ERT.
What Gear Ratio should I use ?
Thank you!

DRIVE2 · Post 11 Oct 2019, 20:38

See this post: GEAR RATIO (Пост autopilot #4491)

aditzuthebest · Post 25 Nov 2019, 11:54

Just finished installing: perfect!
One single bug: Torque is not correctly displayed.
-2, -27 etc.
This is not ok I think.
Can I provide some data to investigate this?

DRIVE2 · Post 25 Nov 2019, 15:07

Small minus is possible when you car is standing still or if while driving you release the gas pedal without set gear selector to N (for manual transmission).

sg1 · Post 25 Nov 2019, 17:07

Negative engine torque is normal and real when braking with engine.
When driving down on step hill in low gear with no throtle it could reach pretty high numbers !

aditzuthebest · Post 25 Nov 2019, 19:40

Ok. I will test on a hill with second gear. Thank you!

aditzuthebest · Post 02 Dec 2019, 09:28

It works! second gear and max acceleration on the hill.. 142 nM displayed. Thank you!