Faild send request .i = 78 at Update

Technical issues

Вопросы по установке. Монтаж, пайка, проводки...
Questions about the installation. Mounting, soldering, wiring ...
Ответить
Disi77
Сообщения: 65
Регистрация:
16 янв 2018, 11:28

 

Сообщение  12 апр 2023, 12:27

I want to make a Update. All fine but when i start the Update first erase Code/Flash and after its a Error.... Now the CMFA not start.....
Вложения
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  12 апр 2023, 12:41

Use a good quality USB cable. And disable all power saving features on your laptop.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Disi77
Сообщения: 65
Регистрация:
16 янв 2018, 11:28

 

Сообщение  16 апр 2023, 19:14

its not de USB Cable.... but after erase the Flash he dont flash the Update and the Display dont start..... No Blue LED flash on the PCB. But its 12 V there..... i thing the flash is empty....
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  17 апр 2023, 05:34

Go to bootloader and update again. With good quality USB cable and with disabled all power saving features on your laptop.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Disi77
Сообщения: 65
Регистрация:
16 янв 2018, 11:28

 

Сообщение  17 апр 2023, 08:22

ok but how i can start the bootloader when the Display dont start, the Screen ar black and the blue Power LED not blinking?
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  17 апр 2023, 08:48

What car ?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Disi77
Сообщения: 65
Регистрация:
16 янв 2018, 11:28

 

Сообщение  17 апр 2023, 22:43

On bench (table)...mk4.... i have only +12v, ignation and ground and the 3 buttons (up,down,reset)
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  18 апр 2023, 07:09

Disconnect power. Press and hold "reset" button. Turn power On (+12V). ColorMFA must go to bootloader. Release "reset" button. Turn Ignition On. Update as described in the instructions.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Disi77
Сообщения: 65
Регистрация:
16 янв 2018, 11:28

 

Сообщение  15 май 2023, 12:17

ok i do this, but no go to "Bootmode". i think the Flash is empty. i load flashfile, not Codefile, he delet flash and the its error... No its not Start and the Blue LED not blink when Power on
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  16 май 2023, 13:13

The bootloader is software and hardware protected from erasure or overwriting.
You are doing something wrong or your kit is not working. Nothing can be damaged by a firmware updating.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Disi77
Сообщения: 65
Регистрация:
16 янв 2018, 11:28

 

Сообщение  16 май 2023, 16:24

there is the blue SMD an this flashin when Power on. But after flashing he is dark, no blue.... and i found no Device in the Devicemanger.....
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  18 май 2023, 21:24

Send the kit to me for testing. If you can't do it yourself. I don't know how you could mess something up with a firmware update.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Ответить