ColorMFA

Hi, I just updated to fw 41, and enabled mirror heating icon, but on passat b5 immo2 icon does not appear. Of course I checked Confort CAN and I found that there is diference when heating is on. Here are the pictures of all three (R, Mid-Heat; L) switch positions.

It looks that on 600 05 fifth value is 8 when heating is off and 9 when on.
There is also change on 608 05 eight value in mid position there is 0, 4 on R and 8 on L mirror switch position.

Please check it on test firmware. Used ID 600, byte 3. 608 not used.

Autopilot your support is simply unbeliveable. Timestamps on files of new test fw are 24 minutes after my post !
No need to say it works perfect...
Big thank you !

24 minutes after my post

This is how the stars were formed.

it works perfect...

Good
Thanks.

Hi,
it is possible to ad steering wheel heating icon for A4 B6/7 ?There is no icon while it is on with driver seat, just mirror icon. and maybe rear window heat icon... thx

The steering wheel heating icon is already present. If it on/off from supported MFSW.
I do not have info about driver seat function for on/off steering wheel heating.

i know abut it,but i have heated steering wheel from B7 or C6 (i dont know)in B6. In diagnostic menu i see heated on/off and temperature of steering wheel but there is no icon in main display. In A4 B6/B7 is steering wheel starting with roller of driver seat on climatronic not by button on itself. the button on steering wheel is no usable, just in A6 C6, i think.
And what about the rear window heating?
thx

i know abut it,but i have heated steering wheel from B7 or C6 (i dont know)in B6. In diagnostic menu i see heated on/off and temperature of steering wheel but there is no icon in main display. In A4 B6/B7 is steering wheel starting with roller of driver seat on climatronic not by button on itself. the button on steering wheel is no usable, just in A6 C6, i think.

Again, I do not have info about this type of st.wheel heating. Give me more information on the CAN bus data and I will add it to the firmware.

And what about the rear window heating?

Not planned.

Here is it... I hope...
https://ulozto.sk/tam/03e40658-4cff-4b3 ... f9b8db8ab1

I think this is a joke.... It is not known what to find in a heap of data ... Yes, yes .. It helped a lot.

I am sorry. What kind of data do u need? Just navigate me and i send a correct info...

Look at the first post. I need this kind of data. It is necessary to say exactly which CAN bus (motor, comfort or information) has the necessary data. What is the ID of this data and in what byte/bit is the change taking place. Such data is not publicly available. You have to look for them on your own. Also need to check the correctness of the data found on other cars.
I don't have such a car. I cannot verify or find this data myself.

This is it?
https://ulozto.sk/tam/28bba99b-8925-456 ... cacc2ec0a7

What ID, what byte/bit ?

It seem that chcange is on
3E1 08
3E3 05
623 08

I don't understand this data.
Indicate in the picture (photo of the CAN monitor) which data is changing. What value when enabled and what value when disabled.

It seem that chcange is on
3E1 08 - 10 90 2D 22 24 71 00 00 change to 10 90 2E 23 23 25 74 00 00
3E3 05 - 4B 43 94 08 00 change to 52 48 94 03 00
623 08 - 00 07 23 48 21 06 20 23 - 00 07 24 12 21 06 20 23
First is heating off and secend on (if i am right).
I dont know what is what but i just roll the rollbar for seat (steeting wheel) heating and this was the change. Maybe something is climatronic, i dont know...
Thx