Страница 1 из 1
OPC Rns-E
Добавлено: 17 мар 2018, 11:30
Kraidl
Hello,
i have an A6 C5 with rns e 193 edition. Is it possible to engage the opc? I have already installed the necessary pdc controll module from the A3
Thanks for the help
OPC Rns-E
Добавлено: 17 мар 2018, 18:12
pavelk
Hello!
Do you have A3 PDC module working? What about CAN-based reverse gear signal?
OPC Rns-E
Добавлено: 17 мар 2018, 19:17
Kraidl
The reverse gear i haven't finished yet but with the button in the font it works.
OPC Rns-E
Добавлено: 18 мар 2018, 11:26
autopilot
Currently ColorMFA only transfer OPC data from Motor-CAN to Info-CAN and back.
It works as gateway only. It not provide any info to CAN about rear gear or other.
OPC support added for A4 where all needed info (for OPC work) already present on CAN-bus. Need only translate OPC data from one CAN to another CAN.
If you know what need to full support OPC for A6 write to me, I'm check possibilities to adding this to ColorMFA.
OPC Rns-E
Добавлено: 18 мар 2018, 16:10
Kraidl
Perfect thanks!
OPC Rns-E
Добавлено: 18 мар 2018, 20:11
AndreyVG
Для правильной работы RNS-E PU (8P0035193x) именно на A6 C5 нужен сигнал заднего хода из аналога преобразовать в цифровой и подать его в CAN + так же преобразовать сигнал скорости. Работа блока парковки OPC от A3 зависит от получения по CAN шине сигнала заднего хода.