OPC Rns-E

Technical issues

Вопросы по установке. Монтаж, пайка, проводки...
Questions about the installation. Mounting, soldering, wiring ...
Ответить
Kraidl
Сообщения: 3
Регистрация:
17 мар 2018, 11:27

 

Сообщение  17 мар 2018, 11:30

Hello,
i have an A6 C5 with rns e 193 edition. Is it possible to engage the opc? I have already installed the necessary pdc controll module from the A3
Thanks for the help
pavelk
Сообщения: 1
Регистрация:
17 мар 2018, 18:11

 

Сообщение  17 мар 2018, 18:12

Hello!
Do you have A3 PDC module working? What about CAN-based reverse gear signal?
Kraidl
Сообщения: 3
Регистрация:
17 мар 2018, 11:27

 

Сообщение  17 мар 2018, 19:17

The reverse gear i haven't finished yet but with the button in the font it works.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  18 мар 2018, 11:26

Currently ColorMFA only transfer OPC data from Motor-CAN to Info-CAN and back.
It works as gateway only. It not provide any info to CAN about rear gear or other.
OPC support added for A4 where all needed info (for OPC work) already present on CAN-bus. Need only translate OPC data from one CAN to another CAN.

If you know what need to full support OPC for A6 write to me, I'm check possibilities to adding this to ColorMFA.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Kraidl
Сообщения: 3
Регистрация:
17 мар 2018, 11:27

 

Сообщение  18 мар 2018, 16:10

Perfect thanks!
AndreyVG
Сообщения: 10
Регистрация:
11 янв 2018, 00:09

 

Сообщение  18 мар 2018, 20:11

Для правильной работы RNS-E PU (8P0035193x) именно на A6 C5 нужен сигнал заднего хода из аналога преобразовать в цифровой и подать его в CAN + так же преобразовать сигнал скорости. Работа блока парковки OPC от A3 зависит от получения по CAN шине сигнала заднего хода.
Ответить