Страница 1 из 1
TTRS display issues
Добавлено: 15 сен 2022, 13:06
ianpgonzaga
Hi! Have a client who installed in TTRS and experiencing some strange things ...
So summary of the gremlins
- ambient temp read higher than actual
- missing 14- suspension (adaptive installed but with KW DDC with magride delete)
- intermittent oil temp reading
- no oil level
- no boost (did you reconfigure this to read from can bus?)
- some modules not connecting
Any suggestions helpful!!
TTRS display issues
Добавлено: 15 сен 2022, 13:09
ianpgonzaga
I am thinking wiring issues maybe...
TTRS display issues
Добавлено: 15 сен 2022, 15:47
autopilot
What year is the car? What engine (letter code)?
TTRS display issues
Добавлено: 16 сен 2022, 11:37
ianpgonzaga
I'll check this
TTRS display issues
Добавлено: 16 сен 2022, 16:37
ianpgonzaga
2013 TTRS plus - CEPB
TTRS display issues
Добавлено: 16 сен 2022, 18:51
autopilot
Is the original cluster red or white?
- ambient temp read higher than actual
Can you give an example? How different are the readings?
Also, if possible, make a short video of the data on the Motor CAN bus and the Comfort CAN bus (from the CAN monitor). Do not forget that the data on the screen is scrolled. You need to see all the data. And the video needs to be in good quality. Send me the link to the video in a PM.
- missing 14- suspension (adaptive installed but with KW DDC with magride delete)
Go to Debug->Diagnostics->ECU List and mark the blocks you need.
- intermittent oil temp reading
- no oil level
If the oil temp is intermittent please check this: 1. soldering... there may be short circuits or other problems when installing the ColorMFA. need to check it out. 2. sensor wires and sensor serviceability. maybe there is a wiring problem or the sensor is starting to die.
- no boost (did you reconfigure this to read from can bus?)
The RS version has no real boost value on the CAN bus. Percent value only (0-100%). ColorMFA does not show boost percentage. Use additional wire from ColorMFA Analog1 to Motor ECU wires.
- some modules not connecting
Errors while connecting or just not connecting? If it just does not connect, then check the connection protocol with these blocks through the VCDS. ColorMFA does not support the UDS protocol. If there are errors during the connection, then I need photos of screens with errors.
TTRS display issues
Добавлено: 20 сен 2022, 23:12
ianpgonzaga
thankyou i have him checking
TTRS display issues
Добавлено: 24 сен 2022, 23:51
ianpgonzaga
TTRS display issues
Добавлено: 25 сен 2022, 02:25
autopilot
On video:
- ambient temperature: during video recording is 18.5 C and the data is the same for all transmitted data on all bus.
- temperature and oil level: when recording a video, an error is transmitted about a sensor malfunction (or not initialized). There is no oil temperature on the CAN bus during recording.
TTRS display issues
Добавлено: 26 сен 2022, 23:33
ianpgonzaga
thanks he's gunna change the oil sensor
It looks like 14-suspension is not showing in the list - even in debug menu it is not avilable to activate.
https://photos.app.goo.gl/jfb51LbzN6jo55Z56 (does it work?)
TTRS display issues
Добавлено: 27 сен 2022, 05:35
autopilot
change the oil sensor
Check the wiring before replacing the sensor. Wiring problems are not uncommon.
14-suspension is not showing in the list
Update firmware. The list of ECUs has been updated in version b38.
TTRS display issues
Добавлено: 27 сен 2022, 23:04
ianpgonzaga
thanks