Страница 1 из 1
No Outside-Temp on T4
Добавлено: 11 фев 2022, 11:59
Disi77
in the Original Dash, i see the Outsidetemp. But not in the Color-MFA... is here a solution? its now Installation-Manual in the Download....
No Outside-Temp on T4
Добавлено: 11 фев 2022, 21:43
autopilot
Please take a picture of all CAN buses in the CAN monitor. All data must be on photo (scroll with up/down button).
No Outside-Temp on T4
Добавлено: 17 фев 2022, 16:44
Disi77
i cant.... i have no car here for the Signal. I found a solution with resistor, capacitor and coding......
No Outside-Temp on T4
Добавлено: 17 фев 2022, 18:38
autopilot
A resistor, capacitor, and coding solution may solve the problem if the cluster does not support this sensor by default.
But you say that this cluster already displays the temperature ..
No Outside-Temp on T4
Добавлено: 21 фев 2022, 09:23
Disi77
yes... but i can't check it on Car. He is to far.....
No Outside-Temp on T4
Добавлено: 23 фев 2022, 14:45
Disi77
can you tell me, wich Signal you want to see? I drive saturday to him ( 220km one way).....
No Outside-Temp on T4
Добавлено: 23 фев 2022, 17:22
autopilot
Did you install in a non-original cluster ? In a "donor" ?
Motor CAN, ID 420, byte2 - must not be 00 or FF. And byte1, bit0 must be 0
No Outside-Temp on T4
Добавлено: 25 фев 2022, 11:14
Disi77
the Cluster is Original (he say), but what is "donor". When in the Can is 00/ff the solutiuon with resistor, capacitor, and coding? But when ist noz 00/ff what can i do?
No Outside-Temp on T4
Добавлено: 25 фев 2022, 12:49
autopilot
When in the Can is 00/ff the solutiuon with resistor, capacitor, and coding?
Yes.
But when ist noz 00/ff what can i do?
In this situation value must display on screen.