Gear assist showing N

Technical issues

Вопросы по установке. Монтаж, пайка, проводки...
Questions about the installation. Mounting, soldering, wiring ...
Ответить
cessnas
Сообщения: 16
Регистрация:
07 апр 2019, 21:09

 

Сообщение  09 май 2021, 15:35

I've got a problem with my Golf mk4, when i'm driving along the gear assist works great, no issues what so ever.
But as soon as i let of the gas to "engine brake" it hops to N. When i press the gass again comes back to normal.
I've just instaled ColorMFA in an S4 B6 aswell and in that car its working perfectly.
My car is quite heavily tuned on the stock ECU(ME7.5), so i'm not sure if the gear assist uses caluclauted engine torque or something. I just updated to the latest firmware of ColorMFA but still having an issue.
Golf MK4 GTI 350BHP :D
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  09 май 2021, 16:45

What is the current consumption displayed when driving in "engine brake" mode?
Can you take video of CAN-monitor (only with an active "Motor CAN") while you driving with "engine brake" ?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
cessnas
Сообщения: 16
Регистрация:
07 апр 2019, 21:09

 

Сообщение  09 май 2021, 17:29

Here are the pictures, the car has "overrun/pops and bangs" enabled. That's why the fuel indicator dosent go to 0.
Вложения
Golf MK4 GTI 350BHP :D
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  09 май 2021, 18:38

Nothing is visible in the photo with such poor quality.
But it doesn't matter ... There is no fix in ColorMFA because you have changed all the markers used to identify neutral gear. If consumption is not zero motor load is also not correct and torque is not correct... It can only be fixed in the firmware of your motor.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
cessnas
Сообщения: 16
Регистрация:
07 апр 2019, 21:09

 

Сообщение  09 май 2021, 18:55

That's what I thought, thanks
Golf MK4 GTI 350BHP :D
Аватара пользователя
sg1
Сообщения: 94
Регистрация:
19 фев 2018, 21:57
Откуда: Ljubljana, Slovenia

 

Сообщение  16 май 2021, 21:32

Autopilot could you short explain identification of neutral gear in latest fw ?
I found: if i put gearbox in neutral when car is in moving ColorMFA shows fifth gear (have no sixth) and shift down red arrow.
This is pretty logical for me - RPM on idle (800) is under minimum value i set (1100) and the ratio between speed and RPM is highest on highest availabe gear - fifth in my case.
Did you implement additional neutral gear detection (for example: 0 throtle pedal position, engine torque arround zero, RPM about idle combined with speed higher that corresponds to idle RPM ...) ?
Passat b5, immo 2, 1,8 T APU
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  01 июн 2021, 16:42

Did you implement additional neutral gear detection (for example: 0 throtle pedal position, engine torque arround zero, RPM about idle combined with speed higher that corresponds to idle RPM ...) ?
Yes, additional detection implemented. Throttle, consumption, rpm... but this does not work on all vehicles now. Need to check cars where it not work, may be not all function is present on CAN and need use other "markers".
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Schattenwelt
Сообщения: 43
Регистрация:
12 апр 2018, 10:18
Откуда: Germany

 

Сообщение  19 июн 2021, 22:19

Good day
I have the same problem with my Passat 3BG 2.8L. It always shows N in "push mode". Engine control unit is 3B0907551CH. Could they fix this as well?
Passat B5.5 Immo3 1.8T / passat3bgalltrack.de
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  20 июн 2021, 15:50

What is the current consumption displayed when driving in "engine brake" mode ?
What firmware are you using ?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Schattenwelt
Сообщения: 43
Регистрация:
12 апр 2018, 10:18
Откуда: Germany

 

Сообщение  21 июн 2021, 17:09

Firmeware is the _b5_flash_v2.9.4b36. What is meant by this "What is the current consumption displayed when driving in "engine brake" mode"
The fuel consumption is there at 0.
Passat B5.5 Immo3 1.8T / passat3bgalltrack.de
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  21 июн 2021, 17:14

It always shows N in "push mode".
"Push mode" is a same as "engine brake" mode ? Right ? Or am I misunderstanding ?
In this mode, the fuel consumption is 0 ?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Schattenwelt
Сообщения: 43
Регистрация:
12 апр 2018, 10:18
Откуда: Germany

 

Сообщение  21 июн 2021, 17:16

Yes is the same.
Passat B5.5 Immo3 1.8T / passat3bgalltrack.de
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  21 июн 2021, 17:21

See PM
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Pow3rL3ss
Сообщения: 15
Регистрация:
21 июн 2021, 23:44

 

Сообщение  21 июн 2021, 23:46

Hi,

I have a 2005 Audi TT 8N and I also am having issues with the gear showing - if I lightly push the clutch in it does show the gear. How is it calculated? I have changed the clutch switch and it is still not working
Audi TT 8N quattro Sport 240, BFV engine code.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  22 июн 2021, 01:04

the gear showing -
Showing - ? ColorMFA does not display -. Only 1-9,PRNDSL
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Pow3rL3ss
Сообщения: 15
Регистрация:
21 июн 2021, 23:44

 

Сообщение  22 июн 2021, 09:56

autopilot писал(а):
22 июн 2021, 01:04
the gear showing -
Showing - ? ColorMFA does not display -. Only 1-9,PRNDSL

Sorry gear is showing N, unless I press the clutch in a small amount
Audi TT 8N quattro Sport 240, BFV engine code.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  22 июн 2021, 11:24

If you fully depress the clutch pedal, N is displayed ?
I do not know, but I think is a mechanical problem. It may be necessary to adjust the pedal position sensor.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
cessnas
Сообщения: 16
Регистрация:
07 апр 2019, 21:09

 

Сообщение  23 авг 2021, 18:47

When I'm coming of the throttle ColorMFA shortly shows N then goes back to the correct gear. This is because ME7.5 ECU atleast has overrun for 1sec where the consumption Is not 0. Can this be fixed with a newer firmware? Also when catalyst heating is active N always shows when engine braking. Cannot ColorMFA use clutch switch to know when to show N?
Golf MK4 GTI 350BHP :D
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  23 авг 2021, 23:10

When I'm coming of the throttle ColorMFA shortly shows N then goes back to the correct gear. This is because ME7.5 ECU atleast has overrun for 1sec where the consumption Is not 0. Can this be fixed with a newer firmware?
Yes, I know about it. I'll try to fix it in the new firmware.
Also when catalyst heating is active N always shows when engine braking. Cannot ColorMFA use clutch switch to know when to show N?
ColorMFA use clutch for displaying N. Every pressing cluch ColorMFA must show N.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
sg1
Сообщения: 94
Регистрация:
19 фев 2018, 21:57
Откуда: Ljubljana, Slovenia

 

Сообщение  24 авг 2021, 02:08

Maybe adding a condition that RPM must be lower then 1000 (when car is moving) to show N will be solution for unwanted N showing.
Passat b5, immo 2, 1,8 T APU
Ответить