Oil level changes 33 to 35

Mrimstad · Post 29 Apr 2021, 15:47

Just recently vent from fw33 directly to 35
And wheras beefore the Oil level was full at ~54mm
It is now 60% ish at 60mm.
Dipstick in morning shows max.
Actualy ut might be alitle above max as its hard to read du to kinks.

Why is the calculstion changed this time?
Audi b5

Post 29 Apr 2021, 17:36

What is the engine on this car ?
What value displayed on right bar ?

Mrimstad · Post 29 Apr 2021, 19:02

autopilot wrote: ↑
29 Apr 2021, 17:36
What is the engine on this car ?
What value displayed on right bar ?

AZR engine
Not driven Long enough to scale the right bar.
I Just upgraded.

Post 30 Apr 2021, 04:34

The left column is associated with the sensor measuring range. It does not show the minimum and maximum as on the probe.
Yes, it changed for A4B5 2.7t. The right column should display the level correctly.

Mrimstad · Post 05 May 2021, 17:11

autopilot wrote: ↑
30 Apr 2021, 04:34
The left column is associated with the sensor measuring range. It does not show the minimum and maximum as on the probe.
Yes, it changed for A4B5 2.7t. The right column should display the level correctly.

I noticed now after driving some. It was Just wierd seeing the left column change so much from last fw.
Thank you.

pety · Post 07 May 2021, 18:23

Hi. I have version b35 and i have some questions. the oil change icon show only on start. then i see no oil warning in cluster. my oil interval was 6 km to change and i drive 50km and see no info about change. maybe it will be good to see some icon about it in OK area... and second question is - it is possible to do in service menu bigger text andd maybe no on left side but on center? it will be nicer...

thx autopilot for your great work...

Post 07 May 2021, 21:36

oil change icon show only on start. then i see no oil warning in cluster.

Don't you understand the difference between service info and oil warning ?
All messages about services are displayed only after turning on the ignition and only if the car has been in sleep mode for more than 1 hour. No icons in OK or other warnings/icons/messages. Same as in original cluster.

pety · Post 07 May 2021, 22:45

i know that in the original cluster is it so, but maybe it will be good to see, or to know that the oil must be changed all time with yellow warning icon,or maybe it will be possible turn the warning on/off in menu.
it is just my idea...