4 Bar Boost Sensor not correct
-
- Posts: 9
- Joined:
- 17 Dec 2018, 13:43
- Location: Germany
I have a 4 bar boost sensor (BOSCH no: 0281 006 059 / VAG: 03K 906 051) and have also changed it to 4 bar. The only problem is he shows the boost pressure incorrectly -0.2 / -0.3 bar less than it normally is.
I hope you can correct this.
Data from the 4 bar sensor:
4.493 V = 4 bar
0.498 V = 0.5 bar
Yours sincerely
I hope you can correct this.
Data from the 4 bar sensor:
4.493 V = 4 bar
0.498 V = 0.5 bar
Yours sincerely
Last edited by Tiavoq on 11 Apr 2020, 17:45, edited 1 time in total.
Golf 4 1.9 TDI 2002 (AXR) & Sharan 2.0 TDI 2008 (BRT)
-
- Posts: 2486
- Joined:
- 28 Dec 2017, 19:07
- Location: Москва
I know about this problem and am trying to find a solution.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Posts: 9
- Joined:
- 17 Dec 2018, 13:43
- Location: Germany
So far, you don't have to wait until autopilot finds a solution
Golf 4 1.9 TDI 2002 (AXR) & Sharan 2.0 TDI 2008 (BRT)
-
- Posts: 13
- Joined:
- 03 Oct 2019, 02:11
Just wait, it will be solved soon i think.
Patience is virtue !
Patience is virtue !
Seat Leon 1M 2004
1.9 TDI ARL
Golf 4 HALF FIS IMMO 3 -> ColorMFA
1.9 TDI ARL
Golf 4 HALF FIS IMMO 3 -> ColorMFA
-
- Posts: 2486
- Joined:
- 28 Dec 2017, 19:07
- Location: Москва
Not soon. It will be only by mid-May.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Posts: 125
- Joined:
- 04 May 2018, 22:59
- Location: France
Use boost by CAN
Thanks autopilot
Thanks autopilot
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
-
- Posts: 2486
- Joined:
- 28 Dec 2017, 19:07
- Location: Москва
Для этого моторные мозги должны уметь отправлять наддув на КАН шину.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Posts: 2486
- Joined:
- 28 Dec 2017, 19:07
- Location: Москва
Use latest update before write.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Posts: 2486
- Joined:
- 28 Dec 2017, 19:07
- Location: Москва
What do you mean when you say "not working fine" ?
Slowly, quickly, lower value, bigger value ?
How you check it ? Photo, video...
Slowly, quickly, lower value, bigger value ?
How you check it ? Photo, video...
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Posts: 19
- Joined:
- 10 Oct 2018, 02:39
lower
ecu log and greddy boost gauge same boost level
color mfa lower all rpm approx 100-150kpa
ecu log and greddy boost gauge same boost level
color mfa lower all rpm approx 100-150kpa
-
- Posts: 4
- Joined:
- 21 Feb 2021, 18:40
I have the same issue with a Bosch 3 bar sensor
Reading are very low compared to boost controller.
I have update to the latest version also.
Reading are very low compared to boost controller.
I have update to the latest version also.
ColorMFA Fitted to Audi S3 8L
R32 Turbo, OEM ECU with Custom Map.
R32 Turbo, OEM ECU with Custom Map.
-
- Posts: 19
- Joined:
- 10 Oct 2018, 02:39
useless to write any problem or new options all same answer
not possible or not not plan and really not fix problem
support not very good
he only does what he likes
i asked make custom boost gauge option and possible see real pressure and vacum and use this input like additional gauge
and relocated second map intake manifold
but not .. because originally ecu not see vacum ...
not possible or not not plan and really not fix problem
support not very good
he only does what he likes
i asked make custom boost gauge option and possible see real pressure and vacum and use this input like additional gauge
and relocated second map intake manifold
but not .. because originally ecu not see vacum ...
-
- Posts: 94
- Joined:
- 19 Feb 2018, 21:57
- Location: Ljubljana, Slovenia
ECU does not see vacuum, but mechanical gauge does ! i have one mounted and almost never use ColorMFA boost gauge even if it works correct in my car. Mechanical gauge shows at least 95 % of time pressure in vacuum area, boost is in normal drive prety rare and so ColorMFA most of the time shows zero.
Passat b5, immo 2, 1,8 T APU