I have a 09.1999 S3 8L with the following checked. Is the ColorMFA compatible?
Checked
1. There IS CAN-bus wires in cluster green socket (pins 18, 19)
2. There ISN'T CAN-bus wires in cluster gray socket (pins 5, 6) - are these optional and what will not display as they are missing?
3. Cluster VAG number is xxx920xxx
4. Coding of adaptation channel 60 in cluster. Cluster seems to work correctly with coding 1024 and 1025
Thanks
Audi S3 8L compatibility
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
In car with this parameters ColorMFA must works.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 3
- Регистрация:
- 20 июл 2019, 14:02
Cool, thanks for the confirmation
Audi S3 8L 09.1999
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
Even if external wires not connected to this pins, ColorMFA must be connected as in installation manual (CAN-wires from ColorMFA to pin5,6 in gray socket).There ISN'T CAN-bus wires in cluster gray socket (pins 5, 6)
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 3
- Регистрация:
- 20 июл 2019, 14:02
OK, noted. Thanks
Audi S3 8L 09.1999