REQUEST FOR NEW FEATURES / Предложения по новым функциям

[autopilot]

See PM.

[Mhussain_17]

Can you add the gauges to the main menu instead of going into measures and then gauges? Can we choose to add for example the boost gauge to the main menu after speed or mpg?

[autopilot]

I think you mean display on the main screen, not in the main menu.
On the "measures - gauges" screen, the gauges are displayed full-screen, taking up as much space as possible. If displayed on a main screen (along with other parameters), the gauges will be smaller. They can't be displayed full-screen because there's other data below (OK area, CCS area, e.t.c). I think that such a gauge would be much worse to read...

[SAJIDQ]

I think a simple small gauge with red indicator and small digital numbers in there would work we know you can do it you are the king of the colour mfa

[Schattenwelt]

Hello, is it possible to display an icon in the “OK” section when the air suspension adjustment is active? Currently, it only appears when the vehicle is stationary.

[autopilot]

Need to think about how to implement this...

[autopilot]

is it possible to display an icon in the “OK” section when the air suspension adjustment is active? Currently, it only appears when the vehicle is stationary.

Test firmware updated. Added the ability to manually set the speed at which air suspension information is not displayed full-screen (the current public firmware limit is 5 km/h). It also allows to display it in the bottom area or in a pop-up window. Please check it.

Can you add the gauges to the main menu instead of going into measures and then gauges? Can we choose to add for example the boost gauge to the main menu after speed or mpg?

The test firmware now includes a hotkey option (in the hotkey settings) that allows you to go directly to the gauges screen. Added the ability to display gauges on the main screen (trip settings for the middle area). Please check it.

[Steffenfks]

Would it be possible to include the time in the "OK" column as well?

[autopilot]

Would it be possible to include the time in the "OK" column as well?

Test firmware updated. Please check it.

[Steffenfks]

Welche ist die Test Firmware

[autopilot]

I think I've already sent you some information in a private message before.

In the latest public version of your firmware, replace the word _flash_ with _xxx_ and set the next version number (48).

[Steffenfks]

The private message is dated December 7, 2025 (t5xxx.2.9.4b.48); it was about the heating system.

[autopilot]

Same firmware name. Test firmware is updated without change name. See date of firmware files.

[Steffenfks]

However, the latest public release is from April 2025.

[autopilot]

Yes, I haven't released the new version publicly. It's still in the testing phase.

[Steffenfks]

Ah, now I get it. It's on, and it's showing the time now, too. Thanks!

[autopilot]

Ah, now I get it. It's on, and it's showing the time now, too.

Thanks.

[Vanhai]

My car is Skoda Octavia 1U5 4x4 2002 г. 1.9 TDI 74 kW ATD.
I have a few comments and a feature request.
The car is 4X4 4motion with Haldex 1 gen, but in diagnostics it doesn't let me see errors, perform a section review or diagnostics AWD.
The official tank volume for 4x4 is 63 liters, but when I fill it to the top it only shows 54 liters. When the fuel gauge is halfway, the on-board computer shows 30 liters, which means the problem is not in the level gauge in the tank.
Is it possible to show remaining kilometers over 1999 or is this a limitation of the dashboard?

I have a suggestion for adding a new feature. To show the battery charge with an icon and percentages, like on a smartphone. I have a device purchased from Lidl or Kaufland, I don't remember, This device is connected to the battery and, according to the voltage measured, LED indicators on the device light up, indicating the battery charge level, 25%, 50%, 75% or 100%. Also at certain speeds with electrical consumers on, what is the charging status of the alternator. If you are interested in adding this feature, I can take pictures of the device and its instructions so you can understand how it works.
My other suggestion is to be able to select the left mirror to tilt when selecting rear view. This function for both mirrors is available on some Mercedes. If possible, also choose the tilt time for each mirror.

[autopilot]

The car is 4X4 4motion with Haldex 1 gen, but in diagnostics it doesn't let me see errors, perform a section review or diagnostics AWD.

Go to the Debug section and enable the ECUs (in Debug→ Diagnostics→ ECU Lists) you want to see in the diagnostics section.

The official tank volume for 4x4 is 63 liters, but when I fill it to the top it only shows 54 liters. When the fuel gauge is halfway, the on-board computer shows 30 liters, which means the problem is not in the level gauge in the tank.

The ColorMFA is not connected to the fuel sensor. Data is received from the instrument cluster via the CAN bus. The data is transmitted directly in liters. The ColorMFA only displays the received data. Look at the diagnostics, the instrument panel will show the same value. The instrument panel may be coded incorrectly.

Is it possible to show remaining kilometers over 1999 or is this a limitation of the dashboard?

There's currently a limitation. I don't know if it can be changed or not.

To show the battery charge with an icon and percentages, like on a smartphone.

I don't think such a feature can be implemented properly. Besides, the battery voltage is displayed on the screen, which already shows how well the battery is performing.

My other suggestion is to be able to select the left mirror to tilt when selecting rear view. This function for both mirrors is available on some Mercedes. If possible, also choose the tilt time for each mirror.

I'm not sure about the two mirrors. As far as I remember, there were restrictions for some cars.
Manual adjustments to the mirror's position when active rear gear will be in the next update (currently in the test firmware).

[Vanhai]

AWD It's there as a menu option, but it doesn't open! Otherwise, the on-board computer shows the percentages for the rear axle, as well as the newton meters of the Haldex.

Screenshot_20260612-221450.png

Screenshot_20260612-221418.png

I have a regular air conditioner, not a climate control system. Is it normal for it not to show that it is on when it is?

Screenshot_20260612-221500.png