ColorMFA

Can colourMFA take a speed signal pulled from the ABS on the CAN and output it to the analog speedo on a mk4 instrument cluster.

There is currently no such feature.
Why do you need this option?
Conventional ABS units do not have such a signal on CAN-bus. Only ASR/ESP units have speed on CAN.
The ColorMFA does not have an analog output. The maximum that can be done is a pulse signal proportional to the speed. To do this, it will need to add an external components.

Hello, thank you for last firmware. Color settings is much better then I expected. Thank you, Autopilot.

Hello! Nice work with the latest update! You think you can make it so the 'User set' colors remain saved if we switch back an forth between default ones and user set? Also, for the ECO MODE, can you make so that when there is no background set for the current gear number, the number turns green instead of the background? Even at night it's hard to tell if ECO MODE kicked in or not, you have to look kind of hard for the green indicator. Can I also suggest some mods for the english language later on? There some expressions here and there that could be tweaked because they don't actually fit the context. Thank you!

You think you can make it so the 'User set' colors remain saved if we switch back an forth between default ones and user set?

Sorry, but I don't think this will be possible.

Also, for the ECO MODE, can you make so that when there is no background set for the current gear number, the number turns green instead of the background?

I'll think about this.

Can I also suggest some mods for the english language later on? There some expressions here and there that could be tweaked because they don't actually fit the context.

You can write to me in a PM about any changes.

hi. is there some possibility to change background or just start logo...
and what is a Com port blocked or something like this by logo loader and how could i fix it? thx

It is not possible to change the background to a custom image.
I don't understand what "com port blocked" means. There are photos ?
You can upload your logos. The instruction is here: https://wiki.colormfa.ru/logoloader

down there, where is COM3-opened is by me COM3 - Blocked, but i check it today and everything is ok now...
and is it possilbe to delete some start logo or animations for more memory space (maybe background) or for other satrt logos? Or maybe in next update? thx

You can upload 4 pictures and 2 animations in any form, and you can delete any of the uploaded pictures or upload another picture in its place.
Pictures installed with the firmware can not be deleted. They are built into the firmware.

Еще фичрексест небольшой:
волей судьбы появилась в семье такая машинка как mersedes vito 2018 года, в жирной комплектации.
И мне очень понравилось в ней как отображается мгновенный(!) расход топлива.

фото:

отображается он в виде прогресс-бара.
я бы очень хотел чтоб реализовали такой же бар у нас на цветном.
разместить его предлагаю(!) между верхней полосой(где два параметра и статус вебасты) и скоростью.
понятно что многим он нафиг не нужен. но кому-то может и понравиться.
и включение сделать его просто по отдельной "галочке".
т.е. "хотите прогресс бар - ставите галку и его показывает".
также хорошо бы иметь настройку его максимальной величины(на мерсе от 0л до 20л).
а когда машин к примеру стоит и расход идет не л/100км, а л/ч, то этот прогресс бар менялся бы на к примеру 0-3л/ч.

и плюс было бы СУПЕР еслиб по процессу заполнения его цвет менялся к примеру от зеленого до красного постепенно до полного заполнения и тд.
про цвет это второстепенное. если с цветом тяж

примерно такая фигня:))))) малевич из меня как балерина) но суть думаю ясна

hi.
first - all the best for all in new year.
second - it is possible to do tire pressure monitor by esp module without tpms sensorses? thx

No. Such a function cannot be done.
More precisely, it is possible, but it will work very poorly or will not work at all (for example, on a low-profile tire).

It is a pity. and can't it be done so, that it can be turned on and off with a warning about the size of the tires with the minimum or recommended dimensions? it would not be necessary to mount the sensors in the wheels and replace the sensors or calibrate everything. it would be enough if esp checked the difference when driving straight...

ESP on this cars is not check/not calculate any differences. Only sending current speed of each wheel to the CAN-bus.
When carrying out tests, no change in wheel speed was found with a very large pressure difference (2.5bar in 3 wheels, 1bar in the test wheel). The speed difference was at the level of the measurement error. It was only on high profile wheels that any difference could be seen. I'm not sure if this feature will work properly and I'm not ready to add it for use yet.

ok.
thanks for the explanation...
and what about "Open Ceremony" – Tachometer needles sweep after ignition off, like in VFIZ

I already wrote about this earlier. This option implemented by external devices works slowly (compare the speed of the arrows on the VFIZ and on the original system where there is such a function). In addition, this is implemented by replacing the original data on the CAN bus. This way, in my opinion, is not correct.
On many VW clusters, this feature can be enabled via a dump modification.

Aaa sorry. I forgot. Yes u wrote about it. its no nessessary for me...

hi, is it possible to get an optical display on the display for active steering wheel heating like in the 3dcolormfa

I didn't understand what is "get an optical display on the display"...
I don't have any info about steering wheel heating.

if there is information via canbus if it would be possible to insert a steering wheel heating symbol at the top. similar to the webasto icon