Неисправности, брак, возможные причины/ Issues and solutions

Technical issues

Вопросы по установке. Монтаж, пайка, проводки...
Questions about the installation. Mounting, soldering, wiring ...
Аватара пользователя
DirtyliMe
Сообщения: 46
Регистрация:
29 дек 2017, 09:55

 

Сообщение  09 янв 2018, 01:10

Тема для обсуждения возможных неисправностей и заводского брака.
онлайн-консультация. куда смотреть, если что-то не работает.
как отремонтировать и стоит ли это делать самостоятельно.

- Как зайти в режим прошивки после неудачного обновления.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  14 ноя 2021, 19:45

I'll try to check it out.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  14 ноя 2021, 21:13

Is it as if the colormfa doesn't come out of sleep mode? How does he wake up?
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  14 ноя 2021, 21:30

There are 2 ways to wake up. Switch On the ignition and any activity on the CAN bus. Both are implemented in hardware.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  14 ноя 2021, 21:48

I can try to go back to old version if need to see if it still makes the same problem?!
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  15 ноя 2021, 15:52

Movie for explain 😉
phpBB [video]
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  15 ноя 2021, 17:21

It does not work properly without ignition.
Are you sure that you do not have any devices that can block the CAN bus data without Ignition ?
Additional alarm, immo off, e.t.c. Check all fuses...
It looks as if the dashboard is not receiving CAN-bus data when the ignition is off.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  15 ноя 2021, 18:53

I have the OEM alarm, the patch for the mirors folding to the remote control and that's it.

Immo ON and no element that blocks the CAN normally.

After Ignition ON ColorMFA perfectly :fool:
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  16 ноя 2021, 20:42

You can try other firmware versions. But I have no information that this problem exists on other VW cars.
What errors are there in block 46 (Comfort system) and 17 (Dashboard)?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  17 ноя 2021, 02:11

No error 🤷🏻‍♂️ 17/46/19

I will try B34 for testing ?!
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Andreas11
Сообщения: 4
Регистрация:
18 ноя 2021, 19:58

 

Сообщение  18 ноя 2021, 20:01

Hello,
I have a problem after 2 weeks after i install a colormfa.
What that could be?

https://youtu.be/jCrEGZSTfCQ
https://youtu.be/z6dpVB4yAx4
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  18 ноя 2021, 22:03

Are you sure everything is installed correctly? Are the dashboard connectors installed correctly?
All pins are well soldered, the wiring is neat, no snot after soldering, no short circuit, etc.
In the first video, you have small screens blinking. This is incorrect and may indicate installation problems.
Take a photo of the Hardware->HW Info on ColorMFA hidden menu.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  19 ноя 2021, 15:10

autopilot писал(а):
16 ноя 2021, 20:42
You can try other firmware versions. But I have no information that this problem exists on other VW cars.
What errors are there in block 46 (Comfort system) and 17 (Dashboard)?
Hello, I come back with a more serious problem :(

I wanted to put an old firmware and the USB connection was interrupted during the transfer!
Now the colormfa does not turn on and the cluster no communicates via CAN with airbag, engine, etc. the K line yes.

Is there a solution to restart the firmware?

:sorry:
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  19 ноя 2021, 16:58

Remove cluster fuse. Press and hold "Reset" button. Put fuse back. ColorMFA must run in bootloader mode. Release "Reset" button. Turn On ignition, connect USB and update firmware.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Andreas11
Сообщения: 4
Регистрация:
18 ноя 2021, 19:58

 

Сообщение  19 ноя 2021, 19:43

autopilot писал(а):
18 ноя 2021, 22:03
Are you sure everything is installed correctly? Are the dashboard connectors installed correctly?
All pins are well soldered, the wiring is neat, no snot after soldering, no short circuit, etc.
In the first video, you have small screens blinking. This is incorrect and may indicate installation problems.
Take a photo of the Hardware->HW Info on ColorMFA hidden menu.
today i disassemble the cluster and clean all solder points with isopropyl alcohol and now everything works. :D
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  19 ноя 2021, 21:33

autopilot писал(а):
19 ноя 2021, 16:58
Remove cluster fuse. Press and hold "Reset" button. Put fuse back. ColorMFA must run in bootloader mode. Release "Reset" button. Turn On ignition, connect USB and update firmware.
You are a GOD :Yahoo!:

I put the b35 to test my problem :unknown:

Thanks autopilot
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  22 ноя 2021, 19:25

Hi,
Tested with b35, same problem.

The problem can come from the cluster which is a lowline?
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  23 ноя 2021, 00:02

I have not encountered such a problem. It doesn't matter which dashboard is installed.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  23 ноя 2021, 02:27

I must be the only one to monitor the "problems" 😔

CCM problem ?

Test b34 ?
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  23 ноя 2021, 10:14

At the moment, only you have reported such a problem.
The guys I asked (on Golf) say that everything works as expected.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
boubou
Сообщения: 125
Регистрация:
04 май 2018, 22:59
Откуда: France

 

Сообщение  23 ноя 2021, 14:12

autopilot писал(а):
23 ноя 2021, 10:14
At the moment, only you have reported such a problem.
The guys I asked (on Golf) say that everything works as expected.
Thanks autopilot, i will try full FIS OEM for testing.

Is possible bad settings on debug ?
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
Ответить