Неисправности, брак, возможные причины/ Issues and solutions
-
- Сообщения: 46
- Регистрация:
- 29 дек 2017, 09:55
Тема для обсуждения возможных неисправностей и заводского брака.
онлайн-консультация. куда смотреть, если что-то не работает.
как отремонтировать и стоит ли это делать самостоятельно.
- Как зайти в режим прошивки после неудачного обновления.
онлайн-консультация. куда смотреть, если что-то не работает.
как отремонтировать и стоит ли это делать самостоятельно.
- Как зайти в режим прошивки после неудачного обновления.
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
Как по мне так там детально смотреть особо нечего... Посмотрю по поводу реализации. Пока не уверен.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 27
- Регистрация:
- 12 янв 2018, 15:51
hi to all. i got a problem with gear speed selection.
In my golf mk4 with EFF gear speed from the 3rd gear go directly to the 6th gear.
I updated gear ratio to oem values.
3.818
2.105
1.345
0.972
0.970
0.806
how it can be possible?How i can solve this issue?
In my golf mk4 with EFF gear speed from the 3rd gear go directly to the 6th gear.
I updated gear ratio to oem values.
3.818
2.105
1.345
0.972
0.970
0.806
how it can be possible?How i can solve this issue?
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
This gear box has 2 pairs of main gears. You need to know the data of these pairs.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 27
- Регистрация:
- 12 янв 2018, 15:51
Final drive I 60 : 18 = 3.333
Final drive II 60 : 22 = 2.727
So what exactly i have to change?
Final drive II 60 : 22 = 2.727
So what exactly i have to change?
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
Use Main pair: 3.333
for 5gear use 0.794
for 6gear use 0.659
I think that's how it should work correct.
for 5gear use 0.794
for 6gear use 0.659
I think that's how it should work correct.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
Hello! Since I updated to latest firmware (b40), I'm having this weird issue at cold starts in the morning. I start the car and everything seems normal and few seconds later I get the 'Airbag fault' error and all the info on the screen, except oil level, freezes and won't update. This happens occasionally. If I restart the car, nothing happens, issue's still there. Only after I stop for a couple of minutes and start the car again the screen comes back to normal and all the info is there. I think it has something to do with how the ColorMFA sleeps. I check with VCDS and there's no error on the Aribag module. I'll try to roll back to previous firmware and see if this still happens, but I didn't had this issue at all prior to update. Looking forward to hear some thooughts about this. Thank you!
Screenshot
Screenshot
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
When the data hangs on the screen, please take a photo: Debug->Hardware->CAN Status and Debug->Hardware->CAN Setup.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
Will do that next time it happens and report back.
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
This morning happened and I took screenshots as advised.
CAN Status
CAN Setup
CAN Setup High Speed
CAN Setup Low Speed
Title shows High Speed but I took the picture in Low Speed (title bug).
Looking forward for further advices. Thank you!
CAN Status
CAN Setup
CAN Setup High Speed
CAN Setup Low Speed
Title shows High Speed but I took the picture in Low Speed (title bug).
Looking forward for further advices. Thank you!
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
In the latest firmware, control over problems on the CAN bus has been strengthened.
You have a lot of errors on the motor CAN bus. Perhaps the errors are not permanent and occur only when the car is started.
See PM. Firmware update with minor changes to test.
You have a lot of errors on the motor CAN bus. Perhaps the errors are not permanent and occur only when the car is started.
See PM. Firmware update with minor changes to test.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
I don't know what kind of errors I have on motor can, but I don't have any errors on the Airbag module, for sure. Nor on other control modules when I scan with VCDS. I'll test the modeed firmware and report back. Let me know what else should I consinder in solving the motor can errors. Thank you!
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
Errors can occur during the start of the motor CAN bus. Due to different device start times, bus initialization start delays and different synchronization times. Such errors are not taken into account in the vehicle blocks. And in ColorMFA they were also not taken into account before. In the latest version, enhanced control has been introduced.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
Since I posted, the issue didn't occur anymore. I think it was related to a fault code I was having with the ASV going faulty. I replaced it and the ColorMFA is perfectly fine now.
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
Have you updated the firmware to the test one? I sent you a PM earlier.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 2
- Регистрация:
- 09 янв 2022, 22:45
Доброго времени суток, на мой взгляд зеленая рамка режима ЭКО, выглядит довольно лаконично) Лучше тогда сделать возможность выбора: рамка или вся область.
Audi allroad C5 2001
-
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
I wanted to update after the next occurrence of the issue, but it disappeared and I didn't have to update. I will if it'll happen again. What's tweaked in the update? I can update if you want me to test something on CAN status.
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
Плохо видно ? Постараюсь что-то придумать...на мой взгляд зеленая рамка режима ЭКО, выглядит довольно лаконично) Лучше тогда сделать возможность выбора: рамка или вся область.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 2515
- Регистрация:
- 28 дек 2017, 19:07
- Откуда: Москва
In firmware b40, a situation is possible in which the CAN bus in ColorMFA will be completely blocked (the data on the screen will not be updated). In the test firmware that I gave in a PM, this problem is fixed.I wanted to update after the next occurrence of the issue, but it disappeared and I didn't have to update. I will if it'll happen again. What's tweaked in the update? I can update if you want me to test something on CAN status.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
I will update, then. I will report back if I encounter other bugs. Thank you!
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 4
- Регистрация:
- 12 фев 2019, 20:18
Добрый день.возникла проблема с цветным.купил,установили, всё работало без нареканий.спустя несколько недель заметил что после 30-40ка минут работы,нижняя правая часть экрана начинала темнеть и это пятно "росло".утром запускаю машину всё норм.спустя время опят пятно ,опять "растёт".
Так длилось около недели.и при очередном запуске просто чёрный экран.
Так длилось около недели.и при очередном запуске просто чёрный экран.
У вас нет необходимых прав для просмотра вложений в этом сообщении.
Audi C5 Allroad 2000