Подключение наддува / Boost connection

Technical issues

Вопросы по установке. Монтаж, пайка, проводки...
Questions about the installation. Mounting, soldering, wiring ...
User avatar
mmgherasim
Posts: 94
Joined:
11 Oct 2018, 18:01
Location: Adjud, Vrancea, Romania
Contact:

 

Post  26 Mar 2020, 23:00

edria wrote:
26 Mar 2020, 14:44
For me update rate is slow, I am used to watching boost numbers in VAG-COM and do not have a problem in rapid update.
If it is possible to make it an option with different timings so we can find the sweet spot. For the Boost Gauge function - there the update rate can be as fast as possible because its a needle. Maybe send a firmware with fast update rate for main screen and see how it behaves on the road ?
I would also like a faster update rate for the boost.
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
batteto
Posts: 8
Joined:
01 Oct 2019, 19:05

 

Post  26 Mar 2020, 23:40

mmgherasim wrote:
26 Mar 2020, 22:59
What year and engine code is your car? You might be good to go if you select can-bus from boost range options in colormfa.
2.0 tdi 16V BRE 2006,my instrument cluster is with oem color fis, but I'm still waiting to send my COLOR MFA !
User avatar
mmgherasim
Posts: 94
Joined:
11 Oct 2018, 18:01
Location: Adjud, Vrancea, Romania
Contact:

 

Post  26 Mar 2020, 23:58

You should see boost via can, no need for wire from ECU.
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
edria
Posts: 13
Joined:
03 Oct 2019, 02:11

 

Post  27 Mar 2020, 00:57

EDC15P does not have boost via can
Seat Leon 1M 2004
1.9 TDI ARL
Golf 4 HALF FIS IMMO 3 -> ColorMFA
User avatar
autopilot
Posts: 2460
Joined:
28 Dec 2017, 19:07
Location: Москва
Contact:

 

Post  27 Mar 2020, 05:52

2.0 tdi 16V BRE 2006
Connection is the same as for BPW. See table on page 1.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
User avatar
mmgherasim
Posts: 94
Joined:
11 Oct 2018, 18:01
Location: Adjud, Vrancea, Romania
Contact:

 

Post  27 Mar 2020, 10:16

edria wrote:
27 Mar 2020, 00:57
EDC15P does not have boost via can
I have EDC16U34 in my 2006 BPW. Why his 2006 BRE should have EDC15P?
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
edria
Posts: 13
Joined:
03 Oct 2019, 02:11

 

Post  27 Mar 2020, 19:39

Disregard my post, I thought you were asking for my car (Leon 1M), why did I not use can+ boost.
If he has 2006 BRE he is for sure EDC16
Seat Leon 1M 2004
1.9 TDI ARL
Golf 4 HALF FIS IMMO 3 -> ColorMFA
User avatar
mmgherasim
Posts: 94
Joined:
11 Oct 2018, 18:01
Location: Adjud, Vrancea, Romania
Contact:

 

Post  27 Mar 2020, 22:24

I made a video of my Motor CAN monitor, so you can see what other info is present for this car and also to see where the boost pressure is showing. Maybe you can find other useful info in motor can. Thanks!
CAN-monitor A4 B7
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
Diman
Posts: 1
Joined:
28 Feb 2018, 00:12

 

Post  26 Apr 2020, 23:10

Здравствуйте, подскажите на 2.7 turbo, мотор AZR Где искать провод наддува?
И в какой разъём приборной панели? Спасибо
User avatar
mmgherasim
Posts: 94
Joined:
11 Oct 2018, 18:01
Location: Adjud, Vrancea, Romania
Contact:

 

Post  29 Apr 2020, 11:36

For 2.7 AZR: PIN 101 of Motronic control unit, blue/gray wire and for dashboard pin check your ColorMFA installation guide and find where the Analog input is connected.
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
boubou
Posts: 125
Joined:
04 May 2018, 22:59
Location: France

 

Post  12 May 2020, 00:12

CAN BUS+ it's only for EDC15 boost via CAN !

Autopilot thanks again
phpBB [video]
Golf 4 Tdi 100@150 | Cluster Passat W8 US 503 LowLine
batteto
Posts: 8
Joined:
01 Oct 2019, 19:05

 

Post  11 Jun 2020, 19:22

boubou wrote:
12 May 2020, 00:12
CAN BUS+ it's only for EDC15 boost via CAN !

Autopilot thanks again
phpBB [video]
How is the boost from the video connected?In my A4 2.0 tdi 16v only show max boost 1.54,but my car has tuning and the turbine is working at 1,75 bar my boost is show via CAN!Do I need a separate wire to see it properly boost!My firmware is b29!
User avatar
EuroUMA
Posts: 27
Joined:
28 Oct 2018, 20:14
Location: RU->CZ->NL
Contact:

 

Post  11 Jun 2020, 20:45

Audi TT 2001 1.8t BAM - 101
Audi TT | 8N | 2001 | BAM | Quattro | FZL | ЭУР | MiniCAN /// Golf IV Cabriolet | 1E7 | 2000
User avatar
autopilot
Posts: 2460
Joined:
28 Dec 2017, 19:07
Location: Москва
Contact:

 

Post  13 Jun 2020, 00:12

How is the boost from the video connected?
Original CAN-bus data for boost accepted only 2,54bar absolute pressure (1.54bar boost).
This guy (from video) use modified engine firmware with doubled (multiplied by 2) range of CAN-bus boost.
Is a "typical" modification for engine ecu. You may found info on nefmoto or other forums.
ColorMFA support this modification (need select "CAN-bus+" in boost calibration menu).

Or you may connect separate wire from engine ecu to dashboard and select correct sensor in boost calibration menu.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
User avatar
Dalnoboyshik
Posts: 26
Joined:
15 Jan 2018, 17:40
Location: Брянск

 

Post  29 Jun 2020, 15:11

Добрый день. После обновления на b32 стало очень сильно скакать показания наддува, что в свою очередь добавляет дискамфорта при просмотре... больше ни у кого такого дискамфорта нет? До обновления как мне кажется было лучше.
User avatar
autopilot
Posts: 2460
Joined:
28 Dec 2017, 19:07
Location: Москва
Contact:

 

Post  29 Jun 2020, 15:53

Очень многие просили сделать обновление наддува быстрым. Типа цветной редко обновляет наддув на экране и получается как-бы сглаживание/запаздывание данных. Теперь обновление быстрое. Раз в 100мс значение на экране обновляется. Те кто тестировал, сказали, что это то что нужно... Х.з... Как просили в общем...
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
User avatar
Dalnoboyshik
Posts: 26
Joined:
15 Jan 2018, 17:40
Location: Брянск

 

Post  01 Jul 2020, 12:51

Понятно. А какой нибудь микропатч нельзя сделать для изменения наддува как было? Может кому то тоже это будет интересно.
User avatar
autopilot
Posts: 2460
Joined:
28 Dec 2017, 19:07
Location: Москва
Contact:

 

Post  01 Jul 2020, 19:44

Посмотрим, может в следующем обновлении добавлю выбор частоты обновления параметров на основном экране.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Cocaina777
Posts: 4
Joined:
13 Dec 2019, 12:31

 

Post  14 Aug 2020, 11:47

Здравствуйте, такая проблема. Авто VW т4 TDI, эбу ebc vm 15+. Подключил наддув как по мануалу на 71 пин, турбина настроена на 1.4 бар, колор показывает максимальный буст 0.9. Ради интереса подключил к 73 пину эбу, показывает в пике 1.6, тоесть как бы завышает. Что делать? Может Колор не корректно отображает наддув? Кстати стоит 3bar map sensor.
VW Transporter 4, 1.9 tdi (afn) 150hp. EDC VM 15+
User avatar
autopilot
Posts: 2460
Joined:
28 Dec 2017, 19:07
Location: Москва
Contact:

 

Post  19 Aug 2020, 10:56

Нужны буквы двигателя (3-х символьный код).
Просто так на любые пины подключать нельзя. Спалите либо мозг, либо вход цветного.
Что выбрано в калибровках ? Выбран тот же диапазон что и у датчика ?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Post Reply