Possible to order a new lcd?

Technical issues

Вопросы по установке. Монтаж, пайка, проводки...
Questions about the installation. Mounting, soldering, wiring ...
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  23 май 2018, 20:55

Just recieved and mounted my colormfa kit (audi a4 b5)
I enssured it was working before trying to put the two halfs of the cluster togheter and i acidently cut the ribbon cable
on the lcd in the process.

The board led still blinks, and beeps are pressent so i assume i only need a new lcd
Is this possible?
Would be sweet with something to look at again soon, been without fis for over a year now.

Best regards.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  23 май 2018, 21:33

Hi,
Yes. Is possible. Please contact to DirtyliMe with this question.

Or, if you need only LCD without back PCB, you may see LCD number on he back side and buy the same LCD in your local store. Perhaps this will be faster.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  23 май 2018, 22:19

ok, i sendt a pm.

But i could also have a look at fixing this if it would be that simple.
https://www.ebay.com/itm/LCD-DISPLAY-SC ... SwC81attuG

This looks to be the same screen, and also matches with the first number on the backside.
Do you think i could just transfer over the pcb with some duble sided tape and it would work?
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  23 май 2018, 23:02

Different model of LCD = different controller inside LCD. Not all of them is supported (even if visually is similar).

I'm think your kit with LCD CT035TN02, not PJ035...
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  23 май 2018, 23:57

Yes the old panel is ct035tn02
However this seem to be discontinued and hard to find.

Im awaiting pm from Dirtylime to sort this then.
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  24 май 2018, 12:54

So, i got linked to this as a replacement.

https://www.ebay.com/itm/231072088759?ul_noapp=true

Ive asked the seller if this is the ct version.
In wich they replied that that was the only version for that phone. (u8650/u8652)
But as you see i found another version further upp in this thread.
So what to believe? I ordered one of this screen its not expensive after all.

" I also think it would be wise to add to the instructions to be werry! carefull when clamping the two halfs togheter again.
Atleast with my rs4 b5 shell, the pcb is all the way pressed upp against the white frame, and is not flush with the lower
side of the cluster pcb, just like the manual says. But even so the shell clipped the ribbon cable.
I didnt even notice any ressistance other than the normal lock on cluster.
Desided to cut out the potion that was the problem so it doesnt happen again.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  24 май 2018, 16:16

In wich they replied that that was the only version for that phone. (u8650/u8652)
For this phone, the Chinese market offers CT035TN02, TM035PDZ15, LMS350DF04, PJ035MA-020, e.t.c.
But all of this LCD have different controller and not all of them supported in ColorMFA.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  24 май 2018, 16:20

Well, better hope they are right then.

I got this link from DirtyLime
https://www.ebay.com/itm/231072088759?ul_noapp=true

So i have ordered one of these.
Yet still want to get one from you guys with pcb just in case.
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  25 май 2018, 02:15

I also have to ask, and i know you are busy people, so thanks for all the feedback.
But what firmware should i use for my rs4 b5?
I soldered upp the board according to this http://www.colormfa.ru/download/A38L_A4 ... _Guide.pdf
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  25 май 2018, 04:08

But what firmware should i use for my rs4 b5?
Need use firmware for Audi A4 (8D). https://colormfa.ru/en/downloads
Current latest version is 2.9.4b24
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  25 май 2018, 12:35

Thank you.
So i got a message back from ebay seller today, saying there was bad screens.
And i cannont find the ct035tn02 anywhere else.
Do you know where i can get one for sure.
Or can i buy one from you?
I asked Dirty but i think he is a werry busy man :P

Best regards.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  28 май 2018, 11:41

Currently I'm not have LCD for shipping.
Please wait reply from Dirtylime. Sorry...
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  28 май 2018, 12:24

Ok thank you.
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  01 июн 2018, 12:51

So i got the new screen from a far off supplier.
And i now have a working colormfa.

The issue i have, i believe my unit was flashed with a6 firmware but i should have a4 on my rs4 b5.
I get some obd data in the cluster but door open triggers xenon range fault. And some other wierd readings on intake temp etc.

Could this be the case? how can i check wich fw is on the unit?
only says 29.4.b24 in fw menu.
And can you use the fw menu again to flash fw? or do you ahve to use the methood where you remove fuse etc
Best regards again.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  01 июн 2018, 13:31

Go to menu->Setting->Design->Car Image. What car is possible to select ?

Firmware update must do trough menu->System->Firmware->Yes.
Only b23 need update via fuse. Bug in firmware.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  01 июн 2018, 15:12

Hi.

In there there is a6 avant/sedan so i will assume there is a6 fw on it?
Thanks so i can just download the latest b5 firmware then and flash safely from that menu.
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  01 июн 2018, 19:24

Ok so fw flashed succesfully and i am realy happy so far.
New screen backlight seems low even on full, but there is preaty harsh sun at the moment so i will see tonight.

Does anyeone have the correct info for rs4 b5 gear ratios? i can find some info but what do i do with the first option in that menu?

Also i see there is new Eng manual for 24fw werry nice, thank you.
Wile reading i see that i should be able to assign some info to the top of the screen aswell?
I have aftermarket stereo so there is probobly no data on the info can.
But still i cannot find option to assign top row items.

Are some items hidden behind cluster coding? I had fis control earlyer and coding was off from trying to get it to work.
Dont have original soft coding so i will have to try some calculated ones at some point.

Once again, great product love it.
And thanks foir replyes.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  02 июн 2018, 07:29

correct info for rs4 b5 gear ratios?
You know your gearbox code (3 chars) ?
Are some items hidden behind cluster coding?
Some items hidden if not possible to use in your car.
But still i cannot find option to assign top row items.
menu->Setting->Design->Main screen-> uncheck Audio data
After uncheck "Audio data" you may select any two parameters for top row.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  02 июн 2018, 11:12

Aha thank you.

I believe it to be fdp. But i will have a look next time im under the car.
Thanks
Аватара пользователя
Mrimstad
Сообщения: 36
Регистрация:
23 май 2018, 20:27

 

Сообщение  02 июн 2018, 23:02

I think i got it worked out. Atleast all the gear show correct.

However. I do not get signal from boost.
This is a 2001 rs4 b5 all motor can functions.
But boost does not show anything. Just 0.00
I can get Reading in meas bloks.

*edit* I reread manual and saw i have to get signal from map to pin 32 on grey connector.
Is there a specific reason the colormfa cannot just collect map data from can?
Ответить