Golf MK4 Fis Control DDP1.6

Interface and features

Все вопросы о внешнем виде и функциях ColorMFA
All questions about the appearance and functions of ColorMFA
Ответить
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  30 авг 2020, 00:18

Hi
First thanks for the colormfa, i like ist very much.
I would like to get Fis Control working with Colormfa in Golf mk4.
I know that Colormfa didn't Support 3LB.
But there is a way to connect Fis Control with DDP 1.6 to the cluster.
I read that Colormfa supports DDP now but I think only DDP2.0, is that right?

Is there a way to make it support DDP1.6 too to get it working in mk4 golf?

Thanks
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  30 авг 2020, 14:05

ColorMFA support both DDP (1.6 andd 2.0).
But support only audio and navigation IDs. Other ID currently is not supported.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  01 сен 2020, 11:58

autopilot писал(а):
30 авг 2020, 14:05
ColorMFA support both DDP (1.6 andd 2.0).
But support only audio and navigation IDs. Other ID currently is not supported.
Thanks.
Fis Control used Telematik ID but the developer send me a firmware so it uses Navigation ID now.

In my menu i can't open navigation setup to activate it. I use Full Fis Version 32.
Can I only open the navigation setup if colormfa see some Navigation IDs on the CanBus? U know what I mean?
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  03 сен 2020, 18:25

I tested now the Firmware of Colormfa with Navigation IDs.
I can see changes on the Canmonitor in Comfortcan now but Colormfa didn't show the Fis Control when it is active.
On one Pic u can see that I have no option "Navigation" in the Setup.

Here is a little video:
https://youtu.be/8El74j7_AYk
Вложения
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  06 сен 2020, 11:37

For VW audio/navi DDP1.6 ColorMFA use IDs: 2E8, 4D6, 4D9, 6B6, 6B9, 696, 699
CAN-Monitor have scrollable data (up/down keys).

All data (navi/phone) can only be displayed from the main screen. From the menu ColorMFA does not switch to Navi display.

I think the best solution for you is using Audi phone IDs/protocol for show info on ColorMFA. Fis-control supported this mode. Data from Audi phone showing on screen immediately without any additional settings.

In what cluster you installed ColorMFA ? Half FIS, Full FIS, w/o FIS ?

"Navigation" option is active if present Navi ring ID: 436
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  06 сен 2020, 22:34

Okay so I can only Open Fis Control in Homr Screen.

Okay nice. I try to find out how to make it work with Audi Phone ID

Installed it into Immo 3 Full FIS

Thank you very much for your help
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  06 сен 2020, 23:07

FullFIS - possible some problems.
In FullFIS clusters ColorMFA work only in "read CAN" mode with audio/navi/phone.
Cluster must do any exchange with navi/audio/phone. ColorMFA does not do this. Read only an existing exchange.
VW cluster does not support Audi protocols and IDs. My suggestion above (using Audi phone) may won't work.
If you want to try using Audi phone IDs/protocols, you must enable "Audi master" setting in the hidden menu.

Ask the developer of Fis control for use real "navigation" IDs. On your photo used phone IDs not navigation IDs. ColorMFA does not support VW phone. Only Navi and Audio. Maybe I'll add VW phone support to the firmware, but not now...
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  07 сен 2020, 19:28

Okay thank you for reply and explanation.
So one of the two have to be changed in the firmware with the CAN IDs and protocol.
Can you say if and when you be able to add VW Phone to the firmware?

But if Fis Control uses the right IDs, it will work with Colormfa even if Colormfa only read Can?
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  08 сен 2020, 16:28

Yes, if you are using navigation IDs everything should work fine.

I don't know about VW phone support, because original VW phone devices for this cars is not used this function. And no one ever asked about the need for such support in ColorMFA.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  08 сен 2020, 16:53

Okay no problem.
I asked developer of Fis Control for changes in firmware and he will do it when he finds the time for it within the next few weeks.
Thank you for your help
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  17 сен 2020, 20:20

Now I have a firmware where the Can IDs are correct in my opinion.
But the numbers are only green for one second and then grey.
Is that correct?
But Colormfa didn't show Fis Control in home screen
Do you have any idea?
Вложения
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  17 сен 2020, 23:27

Check and enable (if disabled) navigation option in cluster coding.
Check and enable "Navigation" and "Show immediately" options in ColorMFA "Navigation" menu.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  17 сен 2020, 23:31

I will check cluster coding tomorrow
In Colormfa menu I don't have "Navigation" menu.
Is it because the cluster coding is maybe wrong?
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  17 сен 2020, 23:35

If you not see "Navigation" menu, Fis-control does not use correct navigation ring ID: 436
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Mave94
Сообщения: 9
Регистрация:
30 авг 2020, 00:11

 

Сообщение  18 сен 2020, 14:17

It worked, Fis Control opens in Colormfa. But it displays only the changes every time

See:
https://youtu.be/dbD6QQeqigM
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  19 сен 2020, 02:53

Current variant of DDP realization tested with some original Navi devices and with original and not original (presents on market) adapters for conversion BAP/DDP2 to DDP1.6. All works fine.
See PM for the corrected firmware for the test. Maybe it will help.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Ответить