I installed using the tutorial from the site. All steps are completed.
On the PCB of ColorMFA I receive 12v from cluster. No image on screen and no power on the led of the PCB of ColorMFA.
The diode is ok. What I should check ?
Thank you!
Cluster is VDO immo3 from Passat.
Cannot start ColorMFA
-
- Сообщения: 16
- Регистрация:
- 12 мар 2019, 21:10
Vw Golf 4 1.6 16v AZD engine; 2002
Cluster: 1J5 920 846 VDO immo3
Cluster: 1J5 920 846 VDO immo3
- mmgherasim
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
- Контакты:
Check your ground if it's in correct place. Maybe you soldered it in the wrong place. If this fails the test, try to unsolder power wires and hook them to an external 12V source and see if the screen powers on. If it's not, it may be a PCB problem.
AUDI A4 B7
2.0 TDI quattro BPW
ColorMFA on Color FIS
2.0 TDI quattro BPW
ColorMFA on Color FIS
-
- Сообщения: 16
- Регистрация:
- 12 мар 2019, 21:10
Ok. I will check you you mention here. Thank you!
Vw Golf 4 1.6 16v AZD engine; 2002
Cluster: 1J5 920 846 VDO immo3
Cluster: 1J5 920 846 VDO immo3
Please check if all cable connections are soldered properly to pcb's (no shorted) - attach photos here if You can.
2003 VW Golf IV 1.9TDI AXR # ColorMFA from 7th batch (MFDB v3.2 on 1J5 920 926C)
-
- Сообщения: 16
- Регистрация:
- 12 мар 2019, 21:10
Correct!
One bad solder at 12v.
Checked twice and that was wrong.
Thank you guys!
Tip: use more flux
One bad solder at 12v.
Checked twice and that was wrong.
Thank you guys!
Tip: use more flux
Vw Golf 4 1.6 16v AZD engine; 2002
Cluster: 1J5 920 846 VDO immo3
Cluster: 1J5 920 846 VDO immo3
Sorry for the long silence, was away and without normal internet.
It’s good that everything worked out.
And thanks lateralus and mmgherasim for the help.
It’s good that everything worked out.
And thanks lateralus and mmgherasim for the help.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Nice! Good to read that You figure out where was the problemaditzuthebest писал(а): ↑05 май 2020, 10:49Correct!
One bad solder at 12v.
Checked twice and that was wrong.
Thank you guys!
Tip: use more flux
Glad to have You back here autopilot! I hope that You restedautopilot писал(а): ↑05 май 2020, 15:59Sorry for the long silence, was away and without normal internet.
It’s good that everything worked out.
And thanks lateralus and mmgherasim for the help.
2003 VW Golf IV 1.9TDI AXR # ColorMFA from 7th batch (MFDB v3.2 on 1J5 920 926C)
-
- Сообщения: 12
- Регистрация:
- 04 янв 2019, 21:23
- Откуда: Отсюда
- mmgherasim
- Сообщения: 94
- Регистрация:
- 11 окт 2018, 18:01
- Откуда: Adjud, Vrancea, Romania
- Контакты: