ColorMFA

I have a 09.1999 S3 8L with the following checked. Is the ColorMFA compatible?

Checked
1. There IS CAN-bus wires in cluster green socket (pins 18, 19)
2. There ISN'T CAN-bus wires in cluster gray socket (pins 5, 6) - are these optional and what will not display as they are missing?
3. Cluster VAG number is xxx920xxx
4. Coding of adaptation channel 60 in cluster. Cluster seems to work correctly with coding 1024 and 1025

Thanks

In car with this parameters ColorMFA must works.

Cool, thanks for the confirmation

There ISN'T CAN-bus wires in cluster gray socket (pins 5, 6)

Even if external wires not connected to this pins, ColorMFA must be connected as in installation manual (CAN-wires from ColorMFA to pin5,6 in gray socket).

OK, noted. Thanks