A3 8L The LCD screen of the meter, the front passenger door is always open.

Technical issues

Вопросы по установке. Монтаж, пайка, проводки...
Questions about the installation. Mounting, soldering, wiring ...
Ответить
Pig Lien
Сообщения: 8
Регистрация:
19 фев 2018, 02:30

 

Сообщение  19 май 2019, 17:34

A3 8L 1.8t 2001
After installing ColorMFA, the LCD screen of the meter now shows that the passenger door of the front seat is always on and cannot be eliminated.
It is normal before replacing the ColorMFA LCD screen. It is normal to determine the function of the door lock block. What causes this condition to occur?
There was no gray instrument plug on the original car. In order to install the S3 meter, the gray plug was added. At present, only the 17/18/19 pin is connected to control the multi-function wiper switch.
Golf mk4 2003 1.8t
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  20 май 2019, 01:11

If in your cluster not present doors signal and you not planned to add it, connect TrInput12, 13, 14 to constant +12V.
Officially cluster without FullFIS for A3 is not supported.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Pig Lien
Сообщения: 8
Регистрация:
19 фев 2018, 02:30

 

Сообщение  20 май 2019, 14:57

Is the 3 pins (TrInput 12/13/14) connected to 12V?
Golf mk4 2003 1.8t
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  20 май 2019, 18:30

Yes. If on your cluster not present gray connector and you not planned use doors signal.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Ответить