Страница 1 из 1

A3 8L The LCD screen of the meter, the front passenger door is always open.

Добавлено: 19 май 2019, 17:34
Pig Lien
A3 8L 1.8t 2001
After installing ColorMFA, the LCD screen of the meter now shows that the passenger door of the front seat is always on and cannot be eliminated.
It is normal before replacing the ColorMFA LCD screen. It is normal to determine the function of the door lock block. What causes this condition to occur?
There was no gray instrument plug on the original car. In order to install the S3 meter, the gray plug was added. At present, only the 17/18/19 pin is connected to control the multi-function wiper switch.

A3 8L The LCD screen of the meter, the front passenger door is always open.

Добавлено: 20 май 2019, 01:11
autopilot
If in your cluster not present doors signal and you not planned to add it, connect TrInput12, 13, 14 to constant +12V.
Officially cluster without FullFIS for A3 is not supported.

A3 8L The LCD screen of the meter, the front passenger door is always open.

Добавлено: 20 май 2019, 14:57
Pig Lien
Is the 3 pins (TrInput 12/13/14) connected to 12V?

A3 8L The LCD screen of the meter, the front passenger door is always open.

Добавлено: 20 май 2019, 18:30
autopilot
Yes. If on your cluster not present gray connector and you not planned use doors signal.