beeper пищалка color MFA
Подскажите тип пищалки используемого в Color MFA, банально нигде не могу найти ответ
Зуммер со встроенным генератором, на 3В.
https://www.chipdip.ru/product/hcm1203x
https://www.chipdip.ru/product/hcm1203x
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Спасибо! Использовал KPX-G1205B, Дима подсказал, работает, правда этот на 5В.
Спасибо! Использовал KPX-G1205B, Дима подсказал, работает, правда этот на 5В.autopilot писал(а): ↑12 май 2019, 13:08Зуммер со встроенным генератором, на 3В.
https://www.chipdip.ru/product/hcm1203x
Дабы не плодить тем спрошу тут)
А бипер что мы пришел вместе с цветным должен пищать на все появляющиеся ошибки? Или остается штатный родной? Тогда зачем нужен дополнительный?
А бипер что мы пришел вместе с цветным должен пищать на все появляющиеся ошибки? Или остается штатный родной? Тогда зачем нужен дополнительный?
Штатная пищит на всё штатное, как обычно. От цветного пищит на то чего в штате нет или на те события на которые штатная молчит (есть такое на А2).
Понял, спасибо! А можно ли заставить пищать бипер цветного на все события, в тч и те которыми пищал штатный? Меня крч переглючило, и я штатную пищаль удалил, полагая что раз у цветного она своя то и штат не нужен. Плюс мне жутко не нравился этот писк, у цветного чуть приятнее
Нет. Только на свои события. Штатные не дублирует и не будет.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Плохо. А почему не будет, если не секрет? Сложность реализации? Я понимаю что допустим нормальным людям оно не потребуется, ну а таким кретинам как я?
-
- Сообщения: 12
- Регистрация:
- 15 мар 2018, 12:26
- Откуда: Targu Mures, Romania
Hi guys!
Just finished to fit a kit on a Mk4 Golf, the buzzer(the small one, coming in the kit) is not ringing, checked the wires, they are OK, checked with another buzzer, the same problem. The big board buzzer works fine. The cluster fiitted on car seams to work ok, diagnossis as well. What could I try to do?
Just finished to fit a kit on a Mk4 Golf, the buzzer(the small one, coming in the kit) is not ringing, checked the wires, they are OK, checked with another buzzer, the same problem. The big board buzzer works fine. The cluster fiitted on car seams to work ok, diagnossis as well. What could I try to do?
2002 VW Passat 1.9 TDI AWX
How you test it ?
Open any door and drive at speed > 5km/h
Or do not completely lower the handbrake and drive at speed > 5km/h
Open any door and drive at speed > 5km/h
Or do not completely lower the handbrake and drive at speed > 5km/h
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 12
- Регистрация:
- 15 мар 2018, 12:26
- Откуда: Targu Mures, Romania
All the kits I fitted, even from this lote, I plug them on bench and the buzzers ring when it displays the faults...this one's small buzzer is not ringing, displays the faults but no sound. I did not assembly it at all, I plugged it on my car but the same...
2002 VW Passat 1.9 TDI AWX
- check buzzer: connect dirrectly to 3V source. If no sound - need replace buzzer.
- visually check components on main PCB: closest to connection buzzer wires. May be one of component not fully soldered or damaged.
- visually check components on main PCB: closest to connection buzzer wires. May be one of component not fully soldered or damaged.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 12
- Регистрация:
- 15 мар 2018, 12:26
- Откуда: Targu Mures, Romania
I will check the buzzer to 3V. I replaced the buzzer with another one but no change...I had a look on PCB but I didn't observe anything strange
2002 VW Passat 1.9 TDI AWX
Only 2 variants possible: defective buzzer or problem on PCB.
Also may be present problem with soldering of buzzer wires, but I think you already check this.
Also may be present problem with soldering of buzzer wires, but I think you already check this.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 12
- Регистрация:
- 15 мар 2018, 12:26
- Откуда: Targu Mures, Romania
Checked the buzzers, they are OK, I have 3 of them, from 3 kits, all of them working from source to 3V but on board they are not...checked wires, polarity, all ok
2002 VW Passat 1.9 TDI AWX
Take photo of main PCB in good quality (only area with components near to buzzer connection).
If you not see problem on PCB and not possible to repair it by himself, contact to Dirtylime for repair/replace kit.
If you not see problem on PCB and not possible to repair it by himself, contact to Dirtylime for repair/replace kit.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 12
- Регистрация:
- 15 мар 2018, 12:26
- Откуда: Targu Mures, Romania
Can I attach pictures here?
I said, I assembly the cluster and I use it on my car, ignoring for the moment the problem with buzzer.
It has a problem with Can Motor, only displays voltage. No speed, no temperature...
I upgraded to last version but no change
I said, I assembly the cluster and I use it on my car, ignoring for the moment the problem with buzzer.
It has a problem with Can Motor, only displays voltage. No speed, no temperature...
I upgraded to last version but no change
2002 VW Passat 1.9 TDI AWX
In "Quick Reply" at bottom of this topic click to "Full Editor & Preview". After go to Full Editor select Attachments tab and add you picture.Can I attach pictures here?
Also you may load image to any image hosting and insert link.
See Motor-CAN data presence in CAN-monitor. If "no data", possible to wrong connection wires of Motor-CAN.It has a problem with Can Motor, only displays voltage. No speed, no temperature...
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 12
- Регистрация:
- 15 мар 2018, 12:26
- Откуда: Targu Mures, Romania
I was there in menu and "no data"
Could be the cluster with problems?
The wires must be correctly connected
I will check again
Could be the cluster with problems?
The wires must be correctly connected
I will check again
2002 VW Passat 1.9 TDI AWX