Generator Warning
i build the CMFA in a Polo 9N. I have only 1 Problem. The Dislay say "Generator Warning" but in teh Pinout there is no Signal from Gnerator..... any Solutions?
If in cluster pinout does not present Alternator warning signal, connect this wire from ColorMFA to +12V.
For Polo:
TrInput3 from ColorMFA connect to +12 (Ignition kl15 or kl30)
In cars where wire from Alternator to Cluster is not present, info about this warning present in CAN-bus. ColorMFA got it from CAN. Of course if this warning present in original system.
For Polo:
TrInput3 from ColorMFA connect to +12 (Ignition kl15 or kl30)
In cars where wire from Alternator to Cluster is not present, info about this warning present in CAN-bus. ColorMFA got it from CAN. Of course if this warning present in original system.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
ok thx. Original is a Full-Fis install. I wiered the same as MK4 for the Polo 9n1. But k-lin ist not present on the cluster....
Yes. Need add wire from ColorMFA to nearest K-Line wire.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)