ColorMFA

VampireLo писал(а): ↑

13 фев 2019, 19:51

Теоретически так, но практически никто не нашел калибровочных данных датчика температуры окружающего воздуха.

Печально...
Я думал уже всё вдоль и поперек изучено.

Hi Autopilot ! I get one new interesting idea for simple but nice improvement of Color MFA - gearing assist.
Now we have nice "simple" gear shift arrow to show upshift at one fixed RPM value.
It will be nice to have "inteligent" throtle dependent gear up shift arrow, with second preset fixed RPM number (near the engine redline of course) which Will function in case when throttle is more than 90 %. I see at gauges that throtle position data is already available.

If i was not clear: when accelerate normal up gear arrow pops at RPM value 1 - 2500 RPM for example, but at >90% throtle it Will wait until RPM value 2 is reached and then pops up - 6400 RPM for 1,8 T engine for example.

On the other side i think downshift arrow is ok at only one value.

Regards, and hope you are not tired of my ideas

Hi.
Need think about this. may be able to add...

autopilot писал(а): ↑

18 фев 2019, 20:25

Hi.
Need think about this. may be able to add...

For triptronic as well? (for those of us with old shift mode)

For triptronic as well?

Only for manual transmission.

Hi Autopilot.

Could it be possible, to ad the can TP2.0 for Audio Data and maybe NavigationInfos for using modern TP2.0 aftermarket and OEM Radio/Navigation Systems without additional CanTP1.6<>TP2.0-adapters.
For example I'm using a Dynavin N7 in my VW T5 witht ColorMFA.
The Dynavin N7 ist running with an integrated can-controller, that translates the Basic TP1.6 Info (ignition, light, MFL, Seering angle...) but the MFA-AudioData only for TP2.0. I think, if the ColorMFA would be able to read the TP2.0 AudioData, it could work. What do you think?

Kind regards Jan

Sorry, but curently I not planned to add supporting new DDP or BAP.


P.S. I'm don't know who first saying "TP1.6 to TP2.0"... but is a wrong...
TP1.6 and TP2.0 is a very... very close protocols.
Differences not in TP versions, differences in data transferred via CAN and data transferred with using TP over CAN.
DDP used TP to transfer data via CAN. Actual chain: DDP -> TP -> CAN.
In VW audio/navi devices differences present in DDP protocol. Or using BAP instead DDP for new devices.

Hi
In Skoda Superb I've seen a feature that might be interesting for our displays.
After every ignition off, after trip it shows for about 15 sec. summary of the last trip. Maybe it be able to add. It looks like this:


Thanks!

I do not even know...
Usually after turning off the ignition, people open the door and get out of the car. Few people continue to sit in the car.
Very ambiguous function... it seems to me...

In stock it's beeing interrupted by opening doors. Open door icon has higher priority. So when summary is showing, when you open the door, it's showing doors.
Or it could show small door icon, as long as showing the summary or it don't need to be showed for 15, but shorter:)
But it's just a proposition

I will try to add in one of the next updates.

Awesome - thanks It can be an optional feature (on/off in settings) for those who doesn't want that.

autopilot писал(а): ↑

27 фев 2019, 22:32

I will try to add in one of the next updates.

Это было бы замечательно!

autopilot писал(а): ↑

27 фев 2019, 22:32

I will try to add in one of the next updates.

It is really way better functionality then goodbye logo !

Hadmig писал(а): ↑

27 фев 2019, 23:30

Это было бы замечательно!

Согласен

Hi, is it possible to add torque calibration to ColorMFA? I have got ALH engine with chip so it shows wrong (original) numbers.

And is it possible to add number of used horsepower on screen or as a gauge? (as Bugatti has)

Thanks, can't wait to new update

is it possible to add torque calibration to ColorMFA? I have got ALH engine with chip so it shows wrong (original) numbers.

No. Contact to chip-tuning company for correction values in engine ECU.

add number of used horsepower on screen or as a gauge?

Not planned in the near firmware.

When I posted that picture of my idea to make possible change color font I posted wrong url. when you click on it, it should have full size. This is how it will look, I think it's pretty good. So just for a look, maybe in the future....

r3nzoll писал(а): ↑

27 фев 2019, 19:02

Hi
In Skoda Superb I've seen a feature that might be interesting for our displays.
After every ignition off, after trip it shows for about 15 sec. summary of the last trip. Maybe it be able to add. It looks like this:


Thanks!

I loadead latest fw and this funciton works really cool on ColorMFA.
I remember that I was often asking myself how many km and time i did just a second after i switched off the ignition… (and then switch it on again to see). Now data are here automaticaly

Thank you both r3nzoll for suggestion and Autopilot for realization !

i think I wrote it in the past about outside temperature if it could be added in main screen, it's now for top or bottom part of dislplay only. Thank you.