REQUEST FOR NEW FEATURES
Добавлено: 21 янв 2018, 21:10
У меня сейчас FIScontrol, к нему подключены датчики давления топлива и масла, ЕГТ.
ColorMFA
REQUEST FOR NEW FEATURES / Предложения по новым функциям
Страница 2 из 62
REQUEST FOR NEW FEATURES
Добавлено: 21 янв 2018, 22:35
К сожалению изначально не было предусмотрено подключение внешних датчиков.
REQUEST FOR NEW FEATURES
Добавлено: 22 янв 2018, 12:08
(and put back on, ... by pressing a stalk button, for example)REQUEST FOR NEW FEATURES
Добавлено: 22 янв 2018, 22:32
Привет из Великобритании
Можем ли мы получить текущее потребление, измененное для миль на галлон, а не галлонов в час в режиме британских единиц
Google перевел так, что возможны ошибки
Можем ли мы получить текущее потребление, измененное для миль на галлон, а не галлонов в час в режиме британских единиц
Google перевел так, что возможны ошибки
REQUEST FOR NEW FEATURES
Добавлено: 23 янв 2018, 03:27
Current consumption is always "time based" at Idle and if speed lower than 5km/h - l/h, gal/h.Можем ли мы получить текущее потребление, измененное для миль на галлон, а не галлонов в час в режиме британских единиц
And always "distance based" while driving (if speed above 5km/h) - mpg, l/100km.
REQUEST FOR NEW FEATURES
Добавлено: 23 янв 2018, 20:24
I can make Polish if interested
REQUEST FOR NEW FEATURES
Добавлено: 24 янв 2018, 02:54
I noticed this morning that it changed when movingautopilot писал(а): ↑23 янв 2018, 03:27Current consumption is always "time based" at Idle and if speed lower than 5km/h - l/h, gal/h.Можем ли мы получить текущее потребление, измененное для миль на галлон, а не галлонов в час в режиме британских единиц
And always "distance based" while driving (if speed above 5km/h) - mpg, l/100km.
although i’d Like to see fuel remaining to show in litres rather than gallons on uk units Better idea would be to let the user select which units to have rather than 3 preset groups.
REQUEST FOR NEW FEATURES
Добавлено: 24 янв 2018, 05:40
I'm talk to UK users and from b23 change some units to this:although i’d Like to see fuel remaining to show in litres rather than gallons on uk units
- Current consumption at Idle: l/h
- Current consumption while driving: mpg
- Remaining fuel: l
- Boost pressure: psi
all other unchanged.
REQUEST FOR NEW FEATURES
Добавлено: 24 янв 2018, 05:50
Have some incompatible chars in Polish.I can make Polish if interested
I'm send you PM with lang files. But not guarantied to add Polish language.
REQUEST FOR NEW FEATURES
Добавлено: 24 янв 2018, 11:07
Okay. I will do two versions - One with all Polish chars, and other with simplified chars, which is also acceptable and can be used (like sms style).
I think that utf-8 works with all Polish chars, but maybe I'm wrong
By the way, how many posts need to be added to unlock PM's sending?
REQUEST FOR NEW FEATURES
Добавлено: 24 янв 2018, 11:15
3how many posts need to be added to unlock PM's sending?
Of course utf-8 support all chars. But ColorMFA not support.I think that utf-8 works with all Polish chars, but maybe I'm wrong
REQUEST FOR NEW FEATURES
Добавлено: 24 янв 2018, 12:46
Oh, I see
So I'll send you files when it will be done
So I'll send you files when it will be done
REQUEST FOR NEW FEATURES
Добавлено: 24 янв 2018, 20:19
REQUEST FOR NEW FEATURES
Добавлено: 25 янв 2018, 15:03
1. Can you add the Air/Fuel Ratio? or the lambda value from the ecu and the knock sensor? Im thinking of somekind of an advanced sensor monitoring option by acquiring the data from the ecu without entering into the measuring blocks. Is this possible?
2. Possibility to connect external sensors, like oil pressure, exhaust gas temperature, etc, that you cannot get from the ecu?
3. Data logging onto a memory card, just like with vcds
2. Possibility to connect external sensors, like oil pressure, exhaust gas temperature, etc, that you cannot get from the ecu?
3. Data logging onto a memory card, just like with vcds
REQUEST FOR NEW FEATURES
Добавлено: 25 янв 2018, 15:08
Hi. What LEDs did you use to change the original ones? It looks sick with the blue theme colorMFA. Very nice!
REQUEST FOR NEW FEATURES
Добавлено: 25 янв 2018, 15:36
1. ColorMFA not used diagnostics in normal work mode. All displayed data is received from CAN-bus. Exchange between ECUs. If you ECU not send lambda, knock sensor, maf info, e.t.c., is not possible to show this info on screen.1. Can you add the Air/Fuel Ratio? or the lambda value from the ecu and the knock sensor? Im thinking of somekind of an advanced sensor monitoring option by acquiring the data from the ecu without entering into the measuring blocks. Is this possible?
2. Possibility to connect external sensors, like oil pressure, exhaust gas temperature, etc, that you cannot get from the ecu?
3. Data logging onto a memory card, just like with vcds
Some Russian guys make modified motor-ECU firmware and have extended info on screen. But is not possible without modification of motor ECU firmware.
3. How connect memory card to board installed to inside of cluster ?
No... Sorry. Impossible.REQUEST FOR NEW FEATURES
Добавлено: 25 янв 2018, 15:39
Color change be added in next firmware update.Hi. What LEDs did you use to change the original ones? It looks sick with the blue theme colorMFA. Very nice!
On photo above is testing.
REQUEST FOR NEW FEATURES
Добавлено: 25 янв 2018, 16:14
3. I was thinking 4 wires from the cluster and a usb port somewhere nicely hidden under the dashautopilot писал(а): ↑25 янв 2018, 15:361. ColorMFA not used diagnostics in normal work mode. All displayed data is received from CAN-bus. Exchange between ECUs. If you ECU not send lambda, knock sensor, maf info, e.t.c., is not possible to show this info on screen.1. Can you add the Air/Fuel Ratio? or the lambda value from the ecu and the knock sensor? Im thinking of somekind of an advanced sensor monitoring option by acquiring the data from the ecu without entering into the measuring blocks. Is this possible?
2. Possibility to connect external sensors, like oil pressure, exhaust gas temperature, etc, that you cannot get from the ecu?
3. Data logging onto a memory card, just like with vcds
Some Russian guys make modified motor-ECU firmware and have extended info on screen. But is not possible without modification of motor ECU firmware.
019_save.jpg
2. Not possible. Initially it was not provided. Sorry.
3. How connect memory card to board installed to inside of cluster ?
I don't know how the board looks like and what ic-s does it have yet, waiting for the 11th batch to order one REQUEST FOR NEW FEATURES
Добавлено: 26 янв 2018, 06:54
At the very beginning it was clear that the main board would be inside cluster. There are no routed lines for memory card on the main board. Also as connection of external sensors.
If it were an external unit, then such connections would be provided.
If it were an external unit, then such connections would be provided.
REQUEST FOR NEW FEATURES
Добавлено: 26 янв 2018, 10:01
Maybe ist possible to versteht an extensionboard. It can be connectet by I2C