REQUEST FOR NEW FEATURES / Предложения по новым функциям

Interface and features

Все вопросы о внешнем виде и функциях ColorMFA
All questions about the appearance and functions of ColorMFA
julius
Сообщения: 48
Регистрация:
29 июн 2018, 10:54

 

Сообщение  27 апр 2019, 14:19

autopilot писал(а):
21 апр 2019, 13:53
Нет, не дублируют.
Штатная пищит на всё штатное, как обычно. От цветного пищит на то чего в штате нет или на те события на которые штатная молчит (есть такое на А2).
У меня при движении с затянутым ручником и при открытии двери на ходу пищат обе :unknown:
VW Passat B5+, приборка VDO 3B0 920 827 immo3 Half Fis
Аватара пользователя
Dalnoboyshik
Сообщения: 26
Регистрация:
15 янв 2018, 17:40
Откуда: Брянск

 

Сообщение  28 апр 2019, 16:54

С праздником друзья. Возможно ли добавить вывод на основной экран температуры топлива? Особенно актуально для дизельных моторов.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  28 апр 2019, 18:30

Возможно, что при движении с ручником и при движении с открытой дверью пищат обе пищалки.
На каких-то приборках работает штатный зуммер на эти события, на каких-то нет. Решили не разбираться какие пищат какие нет и сделать своё на оба. Редкие сообщения, не страшно если продублируются. :)

Температуры топлива нет на шине. Взять её неоткуда. :(
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
hs_warez
Сообщения: 19
Регистрация:
09 апр 2018, 17:35

 

Сообщение  03 май 2019, 15:33

Hello!

Some questions:

- Is it possible / planned to display other values (e.g. boost) instead of the gear-numbers?

- I noticed a few small bugs in the German translation - should I post them (photos / screenshots) here, or should I send them via PM?


Thanks!
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  03 май 2019, 18:10

1. Not planed. May be add option to disable show gear values. But not planned to show other values in this place.
2. If found small numbers of text, is possible to write PM to me with old (current) text and new text. Or take photo and see where incorrect text.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
BoraV5
Сообщения: 7
Регистрация:
13 янв 2019, 22:08

 

Сообщение  05 май 2019, 04:36

Don't know if it is already suggested but it would be nice to add Kilometer / Liter (Oem Japanese setting) instead of Liter / 100km.
VW BORA V5 AQN :D
hs_warez
Сообщения: 19
Регистрация:
09 апр 2018, 17:35

 

Сообщение  05 май 2019, 15:21

autopilot писал(а):
03 май 2019, 18:10
1. Not planed. May be add option to disable show gear values. But not planned to show other values in this place.
2. If found small numbers of text, is possible to write PM to me with old (current) text and new text. Or take photo and see where incorrect text.
Ok, thanks!

Disable gear-number would be nice!

I will send you a PM with Pictures!


rgds
Pig Lien
Сообщения: 8
Регистрация:
19 фев 2018, 02:30

 

Сообщение  07 май 2019, 06:32

Hello, can you increase the Chinese operation interface?
Golf mk4 2003 1.8t
julius
Сообщения: 48
Регистрация:
29 июн 2018, 10:54

 

Сообщение  08 май 2019, 21:19

Возможна ли реализация функции полной диагностики авто по всем блокам сразу с возможностью самостоятельно исключить из проверки те блоки, которые отсутствуют в конкретном авто?
VW Passat B5+, приборка VDO 3B0 920 827 immo3 Half Fis
Аватара пользователя
spl
Сообщения: 18
Регистрация:
10 фев 2019, 16:04
Контакты:

 

Сообщение  09 май 2019, 07:18

Кстати да, тоже об этом думал - было бы удобно.
VW T4 Eurovan 2001г., VR6 2.8
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  12 май 2019, 13:02

can you increase the Chinese operation interface?
No, sorry. ColorMFA does not support Chinese chars.
Возможна ли реализация функции полной диагностики авто по всем блокам сразу с возможностью самостоятельно исключить из проверки те блоки, которые отсутствуют в конкретном авто?
Пока в планах нет такой функции. :(
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Adko13
Сообщения: 21
Регистрация:
07 фев 2019, 01:56

 

Сообщение  19 май 2019, 23:32

Hi..Support colormfa to Turbo timer ?
2. added egt analog animation ?
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  20 май 2019, 01:20

No and No.
Turbo timer is not planned.
EGT is not possible.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Adko13
Сообщения: 21
Регистрация:
07 фев 2019, 01:56

 

Сообщение  20 май 2019, 10:08

autopilot писал(а):
20 май 2019, 01:20
No and No.
Turbo timer is not planned.
EGT is not possible.
What egt not possible? Amk and bam (1.8t) is a original sensor and block messure from vcds
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  20 май 2019, 18:50

ColorMFA does not get info from diagnostics. Only from CAN-bus. But on CAN-bus this info is not present.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
GregM
Сообщения: 25
Регистрация:
19 янв 2018, 04:20

 

Сообщение  07 июн 2019, 02:11

In the USA (not sure of the rest of the world) we have VW MK4 1999.5 Golfs/Jettas that have a motor CAN bus going to the cluster but the airbag controller does not have a CAN bus. The 1999.5 cluster can be upgraded to an Immo2 or Immo3 cluster (to have MFA/FIS or ColorMFA) but the airbag warning light does not function because the airbag controller uses a single wire to the cluster (pin 6 of blue connector) instead of the CAN bus. To fix this, it is necessary to either upgrade to a 1C0 airbag controller or add components to the cluster. See here: https://forums.tdiclub.com/showthread.php?t=308735

It would be nice if ColorMFA could listen on pin 6 of the blue connector and if it sees a positive voltage, display an airbag warning on the screen. Even better if it could send the airbag warning message over the CAN bus to the cluster so that the cluster would light up the airbag warning light, too.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  07 июн 2019, 12:59

Not planned to add support non standard customization.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
daniel_c
Сообщения: 1
Регистрация:
29 июн 2018, 13:14

 

Сообщение  08 июн 2019, 00:36

Is it possible to add two parameters to control minimum and maximum brightness in automatic mode?
For example, if minimum is set for example to 30, brightness don't go down below that, even if light sensor sending smaller value.
And if maximum is set for example to 80, brightness don't go above that.
Аватара пользователя
autopilot
Сообщения: 2460
Регистрация:
28 дек 2017, 19:07
Откуда: Москва
Контакты:

 

Сообщение  08 июн 2019, 02:43

In next release will be added brightness calibration for automatic mode.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
sonique
Сообщения: 19
Регистрация:
10 окт 2018, 02:39

 

Сообщение  12 июн 2019, 23:27

Hello

ecu diag option possible add few favorit ch and save ?? i think good option
not need always search

and audi s3 8l /a3 pictures indicated 8P
maybe change S3 8l ???

and main screen show average fuel consumption add long press button reset ?

main screen average fuel consumption possible change trip 1 or trip 2 show ??
actually which one show ? default
Последний раз редактировалось sonique 14 июн 2019, 02:30, всего редактировалось 2 раза.
Ответить