REQUEST FOR NEW FEATURES / Предложения по новым функциям

[autopilot]

Transport Protocol 1.6 and 2.0
Used in: Audio/Navigation/Diagnostic connections over CAN-bus.
Bug was present if ColorMFA work as master and use TP2.0/1.6 for connect to Audio/Navi/Diag device.

[nazarZP]

Здравствуйте!
1) Возможно отключить параметр наддува во всех меню, в случае атмосферного двигателя?
2) Возможно поправить отчет расхода топлива на холодную до 15.5л, как в моде приборки? (Расстояние от дома до работы 9 км и не совсем привычно, после мода, расход пугает:-))

[autopilot]

1. В цветном не так много мест, где есть отображение наддува и его опций. Мешают ?
2. В последней прошивке (b31) расчет среднего уже поправлен.

[nazarZP]

1. В цветном не так много мест, где есть отображение наддува и его опций. Мешают ?
2. В последней прошивке (b31) расчет среднего уже поправлен.

О! Отдельно большое спасибо, за корректировку, завтра постараюсь обновить.
Да, знаю что не так много мест, но для меня с избытком, а больше всего, не хочется видет, того чего у меня нет. Спасибо.

[fifoIV]

Would be possible to display icon for lights ON (and maybe DRL ON) under main parameter? like has Octavia...it could be optional

[autopilot]

I not planned to add any light icons to screen. Sorry.

[r3nzoll]

Would be possible to display icon for lights ON (and maybe DRL ON) under main parameter? like has Octavia...it could be optional

As an option, would be a nice idea. Especialy as a reminder for those who have problems with microswitches in doors

[fifoIV]

Would be possible to display icon for lights ON (and maybe DRL ON) under main parameter? like has Octavia...it could be optional

As an option, would be a nice idea. Especialy as a reminder for those who have problems with microswitches in doors

Or retrofitted immo3 cluster in immo2 car

[sg1]

I found nice revival of my long time ago idea here And still have some of last unused Trinputs wired but not connected…. If connection is needed at all - i think cluster and Color MFA already know when position light is on (illumination)

15 Oct 2018, 09:32
I finally get my colormfa and install it in vw passat b5 (immo 2). It is realy great piece of engineering but there is always some place to improve. There are last 4 Trinputs unused, and it is a shame. And there are some unused pins in cluster instrument too...
In passat there is no indication of position nor of low beam lights, so simply adding two green icons when + is present on Trinput sound quite simple wish.

And thank you a lot for fast implementation of Trip 3 idea. It is great to have it !

[autopilot]

Especialy as a reminder for those who have problems with microswitches in doors

How you planned to use this "reminder" ?
Typical situation: turn off ignition -> open door -> leave car. In what moment you planned to see light icon ? After switch ignition off ? I think you not watch to screen before turn ignition for checking icons or other info, also as you not watch to light switch... Reminder must work as reminder. Inform you if you forgot to do something.

I do not see any place on the screen to display such icons. So that everything was in the overall design.

[sg1]

I do not see any place on the screen to display such icons. So that everything was in the overall design.

By my opinion there is suitable place in line where OK or other small icons are displayed.

[TheReal1J1]

Hello, I'm Jelle and i've been using the color mfa for some time now and absolutly love it.

Since almost the total design is customizable I started thinking.
Would it also be possible to change the white numbers/letters/dials (basicly everything that stays white normally) to one of the colors available that are already possible for the lines and menu selection?

I spoke with aRd Technik about this via facebook messenger and he advised me to post this idea on here.

Would love to hear your feedback.

Kind regards,
Jelle.

[autopilot]

Sorry, but font color changing will not be added.

[RomanS]

Hi

A lot of people install KN air filter in their cars, these filters need to be cleaned approximately every 5000km -> can we add new service interval for that?


Use case

1) user goes to the menu and check "KN air filter"
2) after what user checked that option, user is able to set service interval from a list (2000 to 7000) these numbers are just for exapmle
3) when the filter needs to be cleaned then a small icon appears in the icon bar
4) user clean/change filter
5) user goes to the menu and click on "reset KN interval"

What do you think?
Can you implement that?

Roman

[autopilot]

I'll think about flexible and custom service settings.

[Irbiss]

Hey together,

is the feature Dynamic Headlight range Control (DHC) for my Golf IV in Version B31 no longer possible?
I cant not find the activation in "debug" menu.
Like this befor:



Holger

[autopilot]

The activation in the same place.
Debug->Software->Errors. Find DHC and set checkbox.

[Irbiss]

OMG sry, you are right, thx.
Maybe can you explain how to use the experimental DDP2 and BAP support for audio/navi?
is this something for the RNS 510?

Holger

[autopilot]

How you connected RNS in your car ? Used additional adapter ?
InfoCAN is soldered in your ColorMFA kit ?

[Irbiss]

Yes, i use the Suwtec Adapter for RNS 510 CAN TP 1.6 to TP 2.0.
And yes too, Info Can is soldered on color MFA.

Holger