Страница 1 из 1

ColorMFA Aftermarket Stereo?

Добавлено: 10 фев 2019, 15:33
TonyJelev
Hello all,

Is it possible for the ColorMFA to show which song is playing on an aftermarket stereo. If so is there a compatability list? If it isn't possible is it because it needs to use the OEM ones (Gamma/Betta/MFD 1) since it transfers the data via CAN/Gala buses.

The question is regarding VW Passat B5.5 / Golf MK4

Best regards,
Tony.

ColorMFA Aftermarket Stereo?

Добавлено: 10 фев 2019, 16:01
autopilot
Only possible show info from original audio devices.
If you aftermarket audio is support VW- or Audi- protocol (via CAN), it show info in ColorMFA. If not support, info is not shown.

ColorMFA Aftermarket Stereo?

Добавлено: 10 фев 2019, 16:50
TonyJelev
Thank you for the quick reply autopilot :)

ColorMFA Aftermarket Stereo?

Добавлено: 12 фев 2019, 02:40
loyd
Does this also apply to the navigation arrows from aftermarket radio? The Android Radio uses a Can Bus Adapter to communicate with steering wheel buttons

ColorMFA Aftermarket Stereo?

Добавлено: 12 фев 2019, 03:02
autopilot
Does this also apply to the navigation arrows from aftermarket radio?
Aftermarket radio show info in the original FullFIS ? If yes, it also show info in ColorMFA.
Can Bus Adapter to communicate with steering wheel buttons
MFSW and Navi is a different functions.

ColorMFA Aftermarket Stereo?

Добавлено: 09 окт 2022, 15:31
Carrarmat
autopilot писал(а):
10 фев 2019, 16:01
Only possible show info from original audio devices.
If you aftermarket audio is support VW- or Audi- protocol (via CAN), it show info in ColorMFA. If not support, info is not shown.
which kind of aftermarket system support vw/audi protocol except the oem radio?

ColorMFA Aftermarket Stereo?

Добавлено: 09 окт 2022, 19:19
autopilot
I don't have such information. I don't know what systems support standard VW/Audi protocols.

ColorMFA Aftermarket Stereo?

Добавлено: 17 ноя 2022, 07:04
rcmaehl
Any idea if the newer clusters (Jetta/Golf MK6) use the same method as older clusters for Navigation / Music Info?

Newer cluster in question:
Изображение

If so, might test out an aftermarket solution that claims to work with those clusters and will report back.

ColorMFA Aftermarket Stereo?

Добавлено: 17 ноя 2022, 09:37
autopilot
"New" clusters use DDP2 or BAP to transfer data between cluster and navigation/radio. Which of the protocols (DDP2 or BAP) depends on the model year, cluster type, navigation/radio model and coding.

ColorMFA Aftermarket Stereo?

Добавлено: 17 ноя 2022, 19:25
rcmaehl
Does colorMFA support either protocol?

ColorMFA Aftermarket Stereo?

Добавлено: 17 ноя 2022, 19:33
autopilot
Yes. Only exchange protocols (DDP2 and BAP). It not support full CAN emulation for new navi/radio.
New navi/radio device may not work correctly on old cars. Need special CAN emulator for send some info to this navi/radio if it installed to old car.

ColorMFA Aftermarket Stereo?

Добавлено: 18 дек 2022, 14:50
Carrarmat
can you add a link of the right can emulator?

ColorMFA Aftermarket Stereo?

Добавлено: 18 дек 2022, 16:35
autopilot
I have not studied this issue. You need to ask the guys on the car forums. What kind of adapters do they use.