R32 cluster displaying as 2.8
-
- Сообщения: 82
- Регистрация:
- 09 фев 2018, 22:40
Hello,
does anyone else notice this issue?
What's the fix? thanks!
does anyone else notice this issue?
What's the fix? thanks!
I found a little similar issue on my Passat 1.8 T, APU engine.
In row Cyl./Valve 4/- is shown
but correct should be 4/20
In row Cyl./Valve 4/- is shown
but correct should be 4/20
Passat b5, immo 2, 1,8 T APU
This data is stored in motor ECU firmware. What info motor ECU sended to CAN, such and displayed.
Maybe used same ECUs for both engines and VAG does not change info in motor ECU firmware.
Maybe used same ECUs for both engines and VAG does not change info in motor ECU firmware.
Old ECUs. This ECUs does not provide full info about motor.In row Cyl./Valve 4/- is shown
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 82
- Регистрация:
- 09 фев 2018, 22:40
Is there not a software option you can implement to “fool” colormfa to display 3.2 ??
How I detect real motor volume ?
Motor say: I'm a 2.8l engine...
If other parameters is the same in 3.2 and 2.8, not possible to distinguish one from the other in ColorMFA software.
May you make some video with Motor-CAN data ? Video must be in good quality. On this engine.
Motor say: I'm a 2.8l engine...
If other parameters is the same in 3.2 and 2.8, not possible to distinguish one from the other in ColorMFA software.
May you make some video with Motor-CAN data ? Video must be in good quality. On this engine.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 82
- Регистрация:
- 09 фев 2018, 22:40
Hi did you receive motorcan from dirtylime?
Yes. Thanks.
Is the all data ? Not scrolled to bottom ?
Is the all data ? Not scrolled to bottom ?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
After data is displayed you may press Up/Down key for scrolling. Data is scrolled if not all of them is fitted to screen.
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 82
- Регистрация:
- 09 фев 2018, 22:40
I sent to dirtylime. Did you receive?
Yes, thanks.
I will try to find differences...
I will try to find differences...
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 82
- Регистрация:
- 09 фев 2018, 22:40
Alright cool.
I can send more data now if needed. I’m now running 3.2 engine / software.
I can send more data now if needed. I’m now running 3.2 engine / software.
I'm don't know how to distinguish one from the other.
On your video and photo above, all parameters from motor ECU only for 2.8.
Even the Hp/torque... (3.2 does not produced with such Hp/torque).
On this car engine is factory installed or swapped ? Engine ECU is original ? Firmware for engine ECU not modified ?
On your video and photo above, all parameters from motor ECU only for 2.8.
Even the Hp/torque... (3.2 does not produced with such Hp/torque).
On this car engine is factory installed or swapped ? Engine ECU is original ? Firmware for engine ECU not modified ?
Добавьте данные об автомобиле в подпись (профиль -> подпись). Чтоб не спрашивать постоянно... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
Please add info about your car to you signature (profile -> edit signature). To not ask every time... :)
-
- Сообщения: 82
- Регистрация:
- 09 фев 2018, 22:40
that is a factory engined r32, 3.2L video
I've had two reports - both factory mk4 R32 cars with the same phenomenon
maybe can there be an option in a menu to change it?
I've had two reports - both factory mk4 R32 cars with the same phenomenon
maybe can there be an option in a menu to change it?