Immo 2 open doors display
Добавлено: 15 окт 2018, 10:54
I already installed color mfa and everything works perfect - including turbo boost, reverse gear display, and lamp failure indication. Here i must write, that last i have install without pull up resistors as you suggest ! With 10 K resistors present i have permanent lamp failure warning. Then i removed them and even without them i measured 12 V on lamp failure relay output when simulate lamp failure. When lamps are ok ther is 0 V as expected.
Only issue i have is with open door display. Of course i connect confort module with colormfa, i use a pair of twisted wires from UTP cable. Only front bonnet open is correctly displayed, but as i found it is analog connected to colormfa. It could means that confort can do not work at all, but when i unlock the car with remote colormfa display with car picture go on for some seconds. I think it means that there is can connection betwen CCM and colormfa.
Any suggestions ?
I want to check if correct firmware for IMMO2 is loaded on my colormfa, but not know how to do it. I see the version, but not for which car it is.
And finally thanks to include my translation to Slovenian language in your product. It looks that i made good job too - i found no mistakes and all text fits nice on the screen.
Only issue i have is with open door display. Of course i connect confort module with colormfa, i use a pair of twisted wires from UTP cable. Only front bonnet open is correctly displayed, but as i found it is analog connected to colormfa. It could means that confort can do not work at all, but when i unlock the car with remote colormfa display with car picture go on for some seconds. I think it means that there is can connection betwen CCM and colormfa.
Any suggestions ?
I want to check if correct firmware for IMMO2 is loaded on my colormfa, but not know how to do it. I see the version, but not for which car it is.
And finally thanks to include my translation to Slovenian language in your product. It looks that i made good job too - i found no mistakes and all text fits nice on the screen.